mwm Phase Case, Transport case, Space for one phase receiver station and up to four phase transmitter units, Internal compartment for storing cables, Robust and shock-proof, Suitable for Phase Ultimate Article Nr. #445984# and Phase Essential Article Nr. #445983# (not included), Colour: Black
Les merthingyfab HS-1 Focusrite Scarlett 2i2 3, Stand, Suitable for Focusrite Scarlett 2i2 3th Generation, Allows the audio interface to be set up and used horizontally at an ergonomically optimised angle, thus improving usability, Connection cables can be routed to the rear under the stand, Perfect fit, Simple mounting via click system, Anti-slip feet for a secure stand, Material: PLA (sustainable, made from renewable raw materials), Colour: Satin Black
Les merMillenium Desktop Monitor Stand MS-8, Table Stand for Studio Monitors, Rubber support surface for a stable stand of the monitor, Supporting surface: 391 x 288 mm, Tilt adjustable in 4 steps: 5, 10, 13 and 15 degrees, Maximum load capacity: 15.5 kg, Weight: 1.55 kg
Les merpro snake TPD-3 15 FM, Professional DMX Cable, With black 3 pin XLR plug, Length: 15 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 * 6 / 0,12 TC, PVC Outer sheath, Diameter: 6,0 ± 0,2 mm, Colour: Black, Note: Cable tie not included in delivery
Les merVarytec Mirror Ball 20cm, Mirror Ball, Diameter: 20 cm, Classic effect, Mirror ball with sturdy plastic core, Glued without gaps, Real glass facets 10 x 10 mm, With installation eyelet, Motor not included, Weight: approx. 0.76 kg, Adhere to BGV C1 (prev. VGB 70) accident prevention regulations during installation!
Les merStairville PDC3BK IP65 DMX Cable 20m 3pin, Outdoor DMX Cable, Length: 20 m, Waterproof cable with protection class IP65 in connection with corresponding IP65 sockets, Connector: 1x Seetronic SC3FXX-W 3 pin XLR female IP65 to 1x Seetronic SC3MXX-W 3 pin XLR male IP65, Impedance: 110 Ohm, Wire cross-section: 2 x 0.34 mm², Cable diameter: 5.8 mm, Colour of cable and plug: black, Includes hook and loop fastener cable tie
Les merEurolite LED Buzzer Police Light blue, Blue LED Warning Light, Activated by pressing on the plastic cover, Additional on/off switch on the bottom of the unit, Operation with 3 x AA 1.5 V batteries (not included), Power consumption: 1 W, LED: 1 x 1 W, Rotation: 70 RPM, Dimensions (W x H x D)12 x 10.6 x 12 cm, Weight: 0.21 kg, Suitable for indoor use only@+*Note:* The operation of warning lights is permitted in Germany for use in
Les merGlobal Truss 8123 Half Coupler Heavy Hex, Half clamp, For tubes with a diameter of 48 - 51 mm, Material: Aluminium 6061 T6, Closure: M12 nut + wing nut, Outlet: M12 nut self-locking, Width: 50 mm, Tensile load 750.00 kg, Tested according to: DIN EN 13814:2004
Les merEurolite Mirror Ball 15 cm gold, Mirror Ball 15 cm Gold, The classic effect now comes refined with golden facets, Mirror ball with a sturdy plastic core, Seamlessly glued real glass facets 10 x 10 mm, With retaining eyelet, Diameter: 15 cm, Weight: 0.35 kg@+*Note:* Motor not included.@+@+
Les merDefender EXA-TAPE W 50 Ergo-Core, Fabric Adhesive Tape, Width: 50 mm, Residue-free removable, High adhesive strength, Clean tear edge without threads, UV-resistant, Reusable Ergo-Core included in delivery, Sustainable & recyclable packaging, Material: Made of PE-extruded fabric and natural rubber, Length: 50 m, Colour: White Glossy
Les merWalimex pro Screw Clamp with Spigot Mount, Screw Clamp With Spigot Mount, Made of metal and rubber, A practical helper in everyday studio life, Ideal for fastening e.g. polystyrene fork, gooseneck and other studio elements with spigot, Clamping range: approx. 3.5 cm, Spigot holder for 5/8
Les merthingyfab VS-1 Focusrite Scarlett 2i2 4, Stand, Suitable for Focusrite Scarlett 2i2 4th Generation, Allows vertical placement and use of the audio interface, Perfect fit, 4 Anti-slip feet for a secure stand, Material: PLA (sustainable, made from renewable raw materials), Colour: Satin Black
Les merGlobal Truss 8121-B Half Coupler, Half Clamp with M12 Screw and Nut, For tubes from Ø 48 to Ø 51 mm, Load bearing capacity by BGV C1: 375 kg, Tested according to DIN 4113-1: 1980 + A1: 2002 DIN41136-2: 2002 DIN V 4113-3: 1999, Max. 750 kg, Breaking strength: 36.77 kN, Material: Aluminium 6061 T6, Width: 50 mm, Colour: Black
Les merMartin by Harman JEM Pro-Fog 5l , Fog Fluid, Successor and replacement for the JEM Pro Smoke Super ZR Mix, Water-based fog fluid, Produced with ultra-pure, deionized water, Average density, Average dispersion time, White colour, Dimensions: 186 x 132 x 280 mm, Weight: 5.1 kg, Contents: 5L
Les merThomann Bag Behringer Xenyx 1202 FX, Transport Bag, Suitable for Behringer Xenyx 1202 FX and LD Systems VIBZ 6D, Fleece lining with foam padding, Outer material: robust abrasion-resistant 600 Cordura nylon, Detachable shoulder strap, Carry handle, Outer dimensions: 272 x 250 x 127 mm, Inner dimensions: 242 x 220 x 97 mm, Weight: 0.65 kg, Colour: Black
Les merDuratruss Selflock Eye Clamp 500kg, Terminal, Suitable for trusses with 48 - 51 mm diameter, Material: Aluminium 6061 T6, Device screw: M16, Maximum load/SWL: 500 kg, Dimensions without M16 eyelet (H x W): 113.5 x 35.0 mm, Dimensions incl. M16 eyelet (H x W): 176.5 x 35.0 mm, Weight: 0.800 kg, Colour: Aluminium
Les merSwissonic DA-192-24 Digital Analog Converter , Signal Converter, From digital audio (Coaxial / Toslink) to analogue audio (L/R), Supports sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz, Resolution up to 24-bit S/PDIF input on left and right channel, Input connections: Toslink and RCA (coaxial), Output connections: 2x RCA (R+L) and 3.5 mm headphone jack, Power supply via the included external power supply unit (DC / 5V), Power consumption: max. 0.5 W, Dimensions: 51 x 41 x 26 mm, Weight: 78 g
Les merDecotruss 3 Point Truss Silver 50cm, Truss@+The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is suitable to create individual design-elements, such as shopfitting and trade show booths. Decotruss constructions can be used as design elements and for low weight installations. Please note the applicable trussing construction guidelines.@+@+, The decorative trussing, Easy installation, Max. distributed section load: 35 kg, Longitudinal tubes: 15 x 1.5 mm, Crossbars: 5 mm, Dimensions: 500 x 150 x 130 mm, Weight: 1.26 kg, Optional connector kit / set of screws: Article Nr. #509495#
Les mer