Avansert, omni-directional kalibrert mikrofon fra miniDSP med USB-tilkobling. Som software kan vi anbefale f.eks. gratisprogrammet REW . Så snart du har mottatt mikrofonen kan du laste ned den unike kalibreringsfilen ved å taste inn serienummeret på denne siden (litt ned på siden): http://www.minidsp.com/products/acoustic-measurement/umik-1 . Du laster ned både 0- og 90-graders (for standard vertikale målinger) kalibreringsfil. Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subber Informasjon fra produsent The UMIK-1 is an omni-directional USB measurement microphone providing Plug & Play acoustic measurement. From speaker & room acoustic measurement to recording, this microphone provides low noise and accurate results you can rely on. Forget about driver installation, OS compatibility and un-calibrated mics. The Umik-1 is a USB Audio class 1 device automatically recognized by all Operating Systems (Windows/Mac) and Ipad with Camera Connection Kit . It is provided with a unique calibration file based on the serial number to insure an accurate measurement. Combined with our recommended acoustic measurement software, it is the perfect match for a plug&play; measurement system. Features Windows/Mac/Linux All measurement software Special features such as calibrated SPL measurement enabled under free Room EQ Wizard (REW) software Frequency response: 20 Hz - 20kHz +/-1dB with calibration loaded USB Audio: USB Audio class 1.0 Driverless interface for Windows, Mac & Linux Product Downloads UMIK-1 Product datasheet UMIK-1 FAQ UMIK-1 Application notes What's in the box? 1 x UMIK-1 microphone 1 x shielded USB C (microphone) to USB (standard plug) cable (1.5m) 1 x mini Tripod 1 x foam wind screen Unique Calibration File Download All UMIK-1 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file for use with surround system applications. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone. Enter the serial number in the form below (three digits then four digits e.g. 700-XXXX). Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. Calibration file download Serial number: - Which calibration file should I use and where to point the UMIK-1? We provide two calibration files to be used depending on your application. - For stereo system (e.g. 2ch dirac live, single speaker measurement), use the 0deg file and point the UMIK-1 at the speakers - For multichannel system (E.g. 5.1/7.1) or a surround application where multiple speakers are spreadout around the room, use the 90deg file and point the UMIK-1 at the ceiling. Recommended by our Friends The miniDSP team built long term relationships with the following leading software applications and is proud to showcase them as our recommeded software solutions: REW : miniDSP worked along with...
Les merPraktisk kit med magnetisk maling som du legger bak veggmalingen for å gi en ramme rundt et lerret. Maskeringen er magnetisk og kan enkelt monteres og fjernes. Praktisk og grei løsning for en rimelig stuekino! Informasjon fra produsent: Kit with magnetic paint and magnetic borders to easily create a dark, removable border around the projection area. This border greatly heightens the contrast perception of the images on the screen. The magnetic paint is applied under the BaseCoat and TopCoat. When the MagneBorder is removed, all you see is a clear white or light grey wall. Contains: - 0.4 litres MagneCoat for 10 m/33 ft of MagneBorder - 10 m/33 ft MagneBorder (width 7.7 cm / 3.0 inch)
Les mer