Syrincs DK69T, Compression Driver Loudspeaker, With IP 69 K certificate, UV-resistant, Rated power: 6 Watts/100 V, Level adjustments: 6/3/1.5 W, Maximum output level: 107 dB, Frequency response: 250 - 20,000 Hz, Dispersion pattern: 150°, Dimensions: 97 x 102 mm, Weight: 0.6 kg, Colour: Light grey (RAL7035), Incl. 60 cm cable
Les merYamaha SPCVR-1201, Transport Cover, Suitable for Yamaha DXR12, DXR12 MKII, DBR12, CBR12, Padded, Tear-resistant polyester with internal PVC foam, Removable front element, Can remain on the speaker during operation to protect it from dust, dirt and splashing water, Rear service flap for access to the controls and the connector panel, Recess for handles, Integrated pocket for cables, etc., Colour: Black
Les merJBL PRX912-CVR, Protective Cover, For JBL PRX912, Water-repellent, durable 600D nylon outer material, Soft 210D polyester interior with protective padding, Cut-out at the top handle with hook-and-loop fastener, Outer dimensions (L x W x H): 356 x 406 x 648 mm, Inner dimensions (L x W x H): 343 x 394 x 629 mm, Weight: 0.7 kg, Colour: Black
Les merthe t.amp TA50 WHD Bathroom Bundle XS WH@+*Bundle offer comprising*, 2x WHD UP 14/2 Marine 8 Ohm, 2-Way (Coaxial) Ceiling Speaker System, For humid rooms, Very good bass reproduction, Simple, tool-free installation with hooks, Impedance: 8 Ohm, Size: 16 cm, Power rating: 25/40 W, Waterproof, Water-resistant cone, Frequency range: 100 - 21,000 Hz, Outer diameter: 196 mm, Installation depth: 73 mm, Ceiling cutout: 180 mm, Weight: 1.2 kg, Colour: White (RAL 9016), Installation kit included for ceiling thickness of 1 to 20 mm @+*Note:* Without transformer, the t.amp TA50, Mini Power Amplifier Module, Power: 2 x 20 W, For fixing directly to flat screen or in suspended ceilings, Input via mini jack, Output via phoenix terminal block, Power supply via external mains adaptor, Integrated limiter, Dimensions: 145 x 95 x 45 mm, Mounting brackets included, 20x pro snake 54500, Speaker cable, Flat cable 2x 1.5 mm², 5.6 x 2.8 mm, Colour: Black / Red, Sold by the meter, Made in Germany
Les merAnalog Cases XTS Stand Large, Desktop Stand, Stable and portable stand for pedals, synthesisers and effect devices, Solid sheet metal construction, Freely adjustable width, Maximum load capacity: up to 12.5 kg, Improved ergonomics and studio organisation by lifting the devices off the desk, Width: 266 - 463 mm, Height: 137 mm, Support surface (depth): 220 mm, Tilt angle: 30°
Les merFocusrite Red 8 Line, Thunderbolt 3 / Dante / Pro Tools HD Audio Interface, 24 bit / 192 kHz, Seamless multi-platform work flow, Connectivity: Thunderbolt 3 interface, 2x mini DigiLink connections for direction connection to Pro Tools HD cards, 2x Dante connections for Audio over IP, Two integrated Red Evolution microphone preamplifiers with +48 V phantom power, high-pass filter, phase reversal and air mode, up to 63 dB distortion-free gain, 3 LC Displays, Monitor control function supports mono, stereo, and multi-channel monitor setups with up to 10 channels including 7.1.2, Internal power supply 100 - 240 V, 50 / 60 Hz, Windows 10 Thunderbolt driver, Design: 19
Les merThon Case Elektron Analog Four MKII, Case, Suitable for Elektron Analog Four MKII black and Elektron Analog Rytm MKII Black, 6.8 mm Plywood phenolic resin coated, 22 x 22 mm Aluminium edge, 2 Small butterfly latches, 1 Case handle, 8 Small ball corners, 4 Rubber feet 25 x 15 mm, Foam padding, Unit can be operated in the lower part, all connections are freely accessible, External dimensions (W x D x H): approx. 449 x 362 x 133 mm, Weight: approx. 5.4 kg, Colour: Brown, Made in Germany
Les merDoepfer MBP25 Front Panel, Front Panel for Doepfer MBP25, Consists of 1 mm sheet steel, Coated in black, printed in white, Four 3 mm mounting holes, Dimensions: approx. 100 x 81 mm, Includes red display screen, four black M3 screws and spacer rollers for mounting the front panel to the PCB, *Note:* The display screen must be glued to the front panel by the customer@+*Note:* Further, possibly necessary, mounting materials are not included.@+@+
Les merFlyht Pro Case Waldorf Iridium, case suitable for Waldorf Iridium, material: black Coated 6 mm plywood, 1 case handle, 2 snap locks, rounded corners, sturdy aluminium profiles, removable lid, interior with EVA, foampadding on top cover, interior dimensions: 441 x 365 x 80 mm, exterior dimensions: 474 x 389 x 176 mm; weight: 2,85 kg
Les merMirai Varidock VC 1201 Elektron, Stand, Robust table stand for Elektron Syntakt, Digitakt, Digitone as well as Analog Heat (MKI, MKII and FX), Consisting of Varidock VB 1000 desktop base module and VA 1060 VESA adapter 100 x 100, Continuously adjustable tilt angle between 16º and 55º, Material: solid metal with matt black surface coating, Dimensions (W x D): 210 x 131 mm, Weight: approx. 538 g, Including VESA mounting screws@+*Note:* Device not included
Les mer