Sennheiser EM 3732 -II P, Dual-Channel UHF Receiver, True diversity, 184 MHz switching bandwidth 776 - 960 MHz, 6 Channel banks each with up to 59 pre-set channels, 1 Channel bank with up to 60 channels freely tunable in 5 kHz increments, Frequency range: 40 - 20,000 Hz, Connections: analogue: XLR-3, digital AES3: XLR-3, Sample Rates: 44.1, 48, 88.2, 96 kHz, 24 Bits, Dimensions 436 x 44 x 250 mm, Format: 19
Les merBenchmark AHB2 Black, Linear Stereo Amplifier, Passive cooling, Bipolar output stage Class AB, Dynamic range: 132 dB, Up to 29 A peak in parallel on each channel, THX-patented feed-forward error correction / THX-AAA technology, 2 Inputs: XLR, 2 x Speakon outputs, 1 x Speakon Bridged Mono output, 2 x 12V trigger inputs / outputs: 3.5 mm mini-jack, Design: desktop, Dimensions (W x H x D including feet): 28 x 9.85 x 23.72 cm, Weight: 5.67 kg, Colour: Black
Les merBenchmark HPA4, Headphone Amplifier, Preamplifier with balanced and unbalanced inputs and outputs for high demands, With THX Achromatic Audio Amplifier (AAA) technology, For a realistic and fatigue-free listening experience, Precise 256-step fully balanced relay gain control in 0.5 dB steps, 100% Analogue, Touch screen for an easy access to functions such as balance control, input level offset, input name, dim function, remote, etc., Headphone outputs: 1 x TRS (6.3 mm jack), 1 x XLR (4-pin), THD < -125 dB (0.00006%), Signal-to-noise ratio: > 135 dB (A-weighted), Frequency response: -3 dB @ 0.1 Hz and 500 kHz, Output impedance: close to 0 Ohm, Max. output power: 6 W at 16 Ohm, Crosstalk: < -133 dB @ 1 kHz, -115 dB @ 10 kHz (XLR4), 2x Stereo line input (balanced, XLR), 2x Stereo line input (unbalanced, RCA), 1x Stereo line output (balanced, XLR), 1x Stereo line output (unbalanced, Cinch), 1x Mono sum output (balanced, XLR), 2x Bidirectional 12 V trigger connections, Balanced line outputs: distortion factor < -125 dB (0.00006%), Signal-to-noise ratio: 137 dB (A-weighted), Frequency response: -3 dB @ 0.1 Hz and 500 kHz, Output impedance: 60 Ohm, Maximum input and output voltage: 20 Vrms (+28 dBu), Crosstalk: < -133 dB @ 1 kHz, -116 dB @ 10 kHz, Power requirement (nominal): 100 - 240 VAC, 50 - 60 Hz, Protection systems: DC and short-circuit detection, overcurrent, overvoltage and thermal protection, IR remote for control with separately available Benchmark remote control (art. 501400, not included in the delivery), Dimensions including feet (W x H x D): 22 x 10 x 21 cm, Weight: approx. 3.7 kg, Colour: Silver
Les merViolectric HPA V550 Pro, Headphone Amplifier, With 256-step relays for even finer tuning of volume levels, With remote control for volume, mute, input selection, resampling and output selection, Motorised volume control, Balance control, 3 Analogue stereo inputs: 2x Cinch unbalanced, 1x XLR balanced, Pre-gain +/-18 dB for optimal adaptation to source and headphones, 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21V RMS at 600 Ohm, Monitoring of headphone outputs for DC voltage and overload, Headphone and line-out paths can be selected separately, Headphone outputs: 1x jack 6.3 mm, unbalanced, 1x XLR 4-pin balanced, 1x Pentaconn (4.4 mm, balanced), Line outputs: 1x RCA L/R unbalanced, 1x XLR L/R balanced, Line-out +/- 18dB signal adjustment to follow-on units, 2 Toroidal transformers, Dimensions (W x H x D): 290 x 80 x 248 mm, Weight: approx. 6 kg, Colour: Black, Incl. a remote control and mains cable
Les merSPL Phonitor xe black + DAC768v2, Headphone Amplifier, Suitable for headphones with jack plug and balanced headphones with 4-pin XLR plug, Offers the option of integrating up to 6 stereo sources: XLR, RCA, USB, Coax, Optical and AES/EBU, AKM converter chip for high sound details, 32-Bit resolution and up to 768kHz sampling rate, Direct Stream Digital up to a resolution of DSD4 or DSD256, 2 VU meters for left and right audio channel, Laterality control for detailed balancing, MODE switch for mono/stereo switching, With phonitor matrix for fatigue-free listening, Crossfeed control for level and frequency adjustment of the left and right audio channel, Angle control for determining the interaural time difference, Analogue inputs: 2x XLR (female, balanced), 2x RCA (unbalanced), Digital inputs: 1x AES/EBU (XLR), 1x Coaxial SPDIF (RCA), 1x Optical SPDIF (Toslink), 1x USB (B), Headphone output: 1x TRS (6.3 mm, jack), 1x XLR (4-pin, balanced), Output power (TRS): 2 x 5 W (into 250 Ohm), Dynamic range (TRS): 135.5 dB, Output power (4-pin XLR): 2 x 3.5 W (into 250 ohms), Dynamikumfang (4-Pol XLR): 130.5 dB, Frequency range: 10 - 300,000 kHz (+/-3 dB), THD + N (10Hz – 22kHz, 0dBu): 0.00082%, Linear power supply with toroidal transformer, Power consumption: max. 40 W, Stand-by power consumption: < 0.3 W, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.9 kg, Colour: Black, Made in Germany
Les merSPL Phonitor 3 DAC, Headphone Amplifier, Monitor Controller and DAC with 120V Technology, 6 Digital & analogue stereo inputs: 2x XLR stereo, USB, S/PDIF (coaxial), S/PDIF (optical) and ES/EBU (XLR), Output switch for easy switching from headphone to speaker playback, plus mute function in the centre position, DAC converter: 32 bit, up to 768 kHz, Support for DSD files up to DSD256, Phonitor matrix with crossfeed speaker Angle and Centre Level, Mono/stereo, Laterality control: shifts the stereo image to the left or right to centre the stereo on the monitor side, Solo L/R, Phase inversion for L and R, L/R swap, 120V technology, Headphone output can be boosted by 12 dB via DIP switch on the rear panel, Phonitor matrix can be output to preamp out, Fully-fledged monitor controller, Output power headphone output (1 kHz, 1% THD, 250 O): 2x 5 W, Frequency range: 10 - 100,000 Hz, Dynamic range: 134.5 dB, Dimensions (W x H x D): 278 x 100 x 300 mm, Weight: 4.15 kg
Les merSPL Phonitor x + DAC768xs silver, Preamplifier / Monitor Controller, Suitable for all headphones with impedances of 10 Ohm and higher, Balanced and unbalanced analogue inputs and outputs: XLR, RCA, Laterality: extremely fine balance control, Mono/stereo switching, Maximum output power: 2 x 3.7 W (into 120 Ohm), Frequency range: 10 Hz to 300 kHz (-3 dB), Distortion factor: 0.00091 % (KH), 0.00085 % (Line), Dynamic range: 135.5 dB (KH), 136.3 dB (Line), Linear power supply with toroidal transformer, Power consumption: max 40 VA, Stand-by power consumption: 0.7 W, Front and cover made of aluminium, Housing made of powder-coated sheet steel, Dimensions (W x H x D): 278 x 100 x 335 mm (with base and volume control), Weight: 4.3 kg, Colour: Silver, Made in Germany
Les merSPL Phonitor x + DAC768xs, Preamp / Monitor Controller, Suitable for all headphones with impedances from 10 ohms, Balanced and unbalanced analogue inputs and outputs (XLR, RCA), Laterality: Extreme fine balance control, Mono / stereo selector switch, Maximum output power: 2 x 3.7 W (at 120 ohms), Frequency range: 10 Hz to 300 kHz (-3 dB), Harmonic: 0.00091% (KH), 0.00085% (Line), Dynamic range: 135.5 dB (KH), 136.3 dB (line), Linear power supply with toroidal transformer, Power consumption: max 40 VA, Stand-by power exception: 0.7 W, Front and cover made of aluminium, Housing made of powder-coated sheet steel, Dimensions: (W x H x D) 278 x 100 x 335 mm (with foot and volume controls), Weight: 4.3 kg, Colour: Black, Made in Germany
Les merViolectric HPA V550, Headphone Amplifier, With remote control for volume, mute, input selection, resampling and output selection, Motorised volume control, Balance control, 3 Analog stereo inputs: 2x RCA (unbalanced), 1x XLR (balanced), 18 +/- dB pre-gain for optimal adaptation to source and headphones, 4 Powerful amplifiers, 6400 mW Pmax at 50 Ohm, 21 V RMS at 600 Ohm, Monitoring of the headphone outputs for DC voltage and overload, Headphone and line-out can be selected separately, Headphone outputs: 1x jack (6.3 mm, unbalanced), 1x XLR (4-pin balanced), 1x Pentaconn (4.4 mm, balanced), Line Outs: 1x RCA L / R (unbalanced), 1x XLR L / R (balanced), 18 +/- dB line-out signal adjustment to downstream devices, 2 Toroidal transformers, Dimensions (W x H x D): 290 x 80 x 248 mm, Weight: approx. 6 kg, Colour: Black, Includes remote control and power cord
Les merViolectric DHA V380 MK2, Headphone Amplifier And D/A Converter, With ESS-Tech ES9026 PRO converter, 2 Analogue stereo inputs: 2 x Cinch (unbalanced), 3 Digital inputs: Opto, Coax with 24 Bit and 96/192 kHz, USB 2.0 with up to 32 Bit / 384 kHz for PCM signals, DSD 64 - 256, 2 x 32 Bit Converters per each channel with -110 dB THD+N and 124 dB dynamic range, Pre-gain: +/- 18 dB for an optimum matching to the source and headphones, Volume control with RK27 potentiometer, 4 Powerful amplifiers, 5000 mW Pmax at 50 Ohm, 21 V RMS at 600 Ohm, A delayed connection of the headphones after power-on, The headphone and line-out path are separately selectable, Headphone outputs: 1 x jack (6.3 mm, unbalanced), 1 x XLR (4-pin, balanced), 1 x Pentaconn, Line outputs: 1 x cinch L/R (unbalanced), 1 x XLR L/R (balanced), Toroidal transformer, Dimensions (W x H x D): 290 x 80 x 248 mm, Weight: approx. 6 kg, Colour: Black, Incl. a power cord and user manual
Les merHeritage Audio DTT-73, 2-Channel Microphone Preamplifier / DI in a desktop case, 80 dB Class A microphone preamplifier with 20 dB pad, 50 dB Class A line preamplifier, 2 DI inputs, 2 DI-THRU sockets with ground lift switch, Separate gain controls in the input and output for saturating the input signal without overloading the output signal, Variable high pass filter, Phase connection, Impedance Mic: 1,200 ohms (HI), 300 ohms (LO), Impedance line: 10k ohms, Impedance DI:> 2M Ohm, Carnhill input and output transformers, Phantom power: + 24 / + 48 V, Internal network part, 2 Mic inputs: XLR, 2 Line inputs: XLR, 2 DI inputs: 6.3 mm jack, 2 Line outputs: XLR, Desktop housing with wooden side panels and carrying strap
Les merAvantone CLA-10 Studio Bundle@+*Bundle offer comprising*, Avantone CLA-200, Studio Power Amp, Convection-cooled studio amplifier, Class AB, Power: 2 x 300 W at 4 Ohm, 2 x 200 W at 8 Ohm, Bridged Mono: 500 W at 8 Ohm, Frequency range: 20 - 20,000 Hz, THD: < 0.1%, Signal to noise ratio: > 94 dB, Inputs: 2x XLR female, Outputs: 2x XLR male Link, 2x screw terminal and 2x Speaker Twist, Dimensions: 483 x 457 x 89 mm, Format: 19
Les merthe box pro Achat Amprack MK II, Ready-built Amprack On Wheels, 1x E1500 bass power amp, 1x E1200 mid/hi power amp, FIR DSP 408, Connection panel and power supply, DSP pre-programmed for ACHAT Rock 'n Roll, ACHAT Open Air, ACHAT Club Power and ACHAT Mobile Power
Les merSPL Phonitor se & DAC768xs Silver, Headphone Amplifier, Powerful headphone amplifier for studio and hi-fi applications, Unbalanced analog RCA inputs, Digital inputs with 32-bit DA converter (USB, Coax, Optical), Support of sampling frequencies up to 768kHz PCM as well as playback of DSD (DSD4 or DSD256), VOLTAiR - 120 volt technology, Phonitor matrix with 2 presets (C1 / Off / C2), Headphone output: 6.3 mm stereo jack socket, Frequency response headphone output: 10 to 300,000 Hz (-3 dB), Crosstalk at 1 kHz: -90 dB, THD + N (10 Hz - 22 kHz, 0 dBu): 0.00091%, Noise (A-weighted): -103 dB, Max. Output power (600 O): 2 x 2.7 W., Max. Output power (250 O): 2 x 5 W., Max. Output power (32 O): 2 x 1 W., Dimensions (W x H x D): 278 x 57 x 330 mm, Weight: 2.8 kg, Colour: Silver
Les merAvantone CLA-400, Studio Power Amplifier, Class A/B amplifier, Suitable for passive speakers, Analogue signal path, 2 Large VU meters for optical feedback, Cooling by convection (no fan installed), 3 Operating modes: Stereo, bridge and parallel, 2 XLR inputs with link output, 2 Speakon sockets or banana connectors at the outputs, Power: 2x 540W at 4Ohms (1kHz), 2x 360W at 8Ohms (1kHz), Bridged mono: 760W at 8Ohm (1kHz), THD (1kHz): 103dB, Construction: 19
Les merViolectric DHA V226, Headphone Amplifier And D/A Converter, Cirrus 32-bit CS43131 converter with dynamic range of 130 dB and THD+N of -115 dB, Supports PCM signals up to 32 bit and 384 kHz and DSD 256, 4 Powerful amplifiers, 3500 mW Pmax into 100 ohms, 23 V RMS into 600 ohms, Delayed connection of the headphones after power-on, Volume control with RK 27 potentiometer, Large 38 mm all-aluminium knob, 50 V Internal operating voltage, ideal for high-impedance headphones, 4 Line inputs: Cinch (2 x stereo), 2 Line outputs cinch (1 x stereo), Headphone outputs: 1 x 4-pin XLR balanced, 1 x Pentaconn balanced and 1 x 6-3 mm jack unbalanced, USB-C, Dimensions (W x H x D): 165 x 54 x 228 mm, Weight: 3 kg
Les merViolectric HPA V222, Headphone Amplifier, Balanced headphone amplifier with 4 output stages, 50 Volts internal operating voltage - ideal for high-impedance headphones, High output power, for headphones with low impedances and magnetostats, +/- 18 dB pre-gain, 3500 mW Pmax at 50 Ohm, > 23 V RMS into 600 Ohm, Volume control with RK 27 potentiometer, Large 38 mm all-aluminium knob, Delayed switching of headphones after power-on, Integrated power supply, 2 Line inputs: XLR (L/R), 2 Line inputs: RCA (L/R), 1 Stereo headphone output: 4.4 mm Pentaconn balanced, 1 Stereo headphone output: 4-pin XLR balanced, 1 Stereo headphone output: 6.3 mm jack unbalanced, Dimensions (W x H x D): 170 x 65 x 252 mm, Weight: 3.1 kg
Les merSPL Phonitor se Black, Headphone Amplifier, Powerful headphone amplifier for studio and hi-fi applications, Unbalanced analog RCA inputs, VOLTAiR - 120 volt technology, Phonitor matrix with 2 presets (C1 / Off / C2), Headphone output: 6.3 mm stereo jack socket, Frequency response headphone output: 10 - 300,000 Hz (-3 dB), Crosstalk at 1 kHz: -90 dB, THD + N (10 Hz - 22 kHz, 0 dBu): 0.00091%, Noise (A-weighted): -103 dB, Dynamic range: 135.5 dB, Max. Output power (600 O): 2 x 2.7 W., Max. Output power (250 O): 2 x 5 W, Max. Output power (32 O): 2 x 1 W, Dimensions (W x H x D): 278 x 57 x 330 mm, Weight: 2.8 kg, Colour: Black
Les merTascam CD-6010, Professional CD Player, For broadcasting, recording, event equipment and fixed installation, CD Loading and emergency release, Integrated monitor speakers in the front panel, 20 Presets for cue points, Instant start capability for up to 20 tracks and Auto-cue function, Auto ready and title playback, Playback speed can be changed by ± 16%, Playback program up to 100 storable CD's, Playback of audio CDs and data CDs with MP3 and WAV files (CD-R), Flashback function to jump back quickly for a few seconds during playback, Playback mode: Normal playback, Single playback, Programmed playback (up to 99 tracks), Pitch control (± 16%), Tonality hold (only the speed changes), Key-lock to avoid misuse, Backlit LCD display, Detachable power cord, Dimensions: 19
Les merLD Systems Curv 500 IAMP, 4-Channel Class-D Power Amplifier, Especially suitable for CURV 500 installations, 4 x 240 W at 4 ohms, 4 x 120 W at 8 ohms, 4 x 60 W at 16 ohms, Frequency range: 10 - 22,000 Hz, Each channel can control up to six CURV-500 satellites or one CURV500ISUB subwoofer, OLED display, Protection circuits: DC, short circuit, over-current, soft start, thermal overload, Inputs: 4 x Line, terminal block, XLR, 4 Speaker outputs, Dimensions (W x H x D): 482 x 44 x 420 mm, Weight 6.8 kg, Format: 19
Les merKramer PA-240Z 240W Power Amplifier, Power Amplifier, 1 x 240 W @ 70 V / 100 V, 2 x 120 W @ 4 / 8 Ohm, With balanced and unbalanced inputs and line level output, 2 Inputs with individual reinforcement, Each output supports independent input mixing with master volume, 3-band parametric EQ and selectable high-pass filter, Controllable via RS-232 and IP, Integrated DSP, Incl. power cable@+@+*Technical data:*@+@+, Inputs: 1 x unbalanced stereo with 3.5 mm jack, 1 x balanced stereo +4 dBu/10 kO with 5-pole terminal block, Outputs: 1 x balanced stereo line level with 5-pole terminal block, 1 x stereo or 1 x mono speaker output with 4-pole large terminal block, Input sensitivity: Reaches full power at 0.3 V (-10 dBV), Output power: 2x 120 W @4 ohms or 8 ohms or 1 x 240 W @70 V or 100 V, Amplifier type: Class D, Max. voltage gain: 26 dB SE/32 dB BTL, Dynamic range: 119 dB, Frequency range: 20 to 20000 Hz @ +/-1 dB, Signal to noise ratio: 80 dB - 10 dBV, 20 to 20,000 Hz, Control: Screw trimmer as gain attenuator, IP and RS-232, Audio THD+noise: 0.003 % (1,000 Hz @ 1 W), Audio 2 harmonic: 0.08 % @75 W RMS @ 4 ohms, 6670 Hz, Power supply: Universal mains 85 to 265 VAC (full power at 120 to 230 V), Overall efficiency: 89.5 %., Dimensions: 21.5 x 16.3 x 4.4 cm, Weight: 0.9 kg
Les merQSC GXD 8, Power Amplifier, Very low installation depth: 259 mm, Weight: Only 6 kg, Power: 2x 1200 W at 4 ohms, Hi-peak power up to 4500 W, Class-D output circuitry, Large, backlit 256p x 128p LC display, 2 Rotary encoders and 3 buttons for quick access, High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 20 Hz up to 4 kHz, Low pass filter, 4th-order Linkwitz-Riley, adjustable frequency of 60 Hz up to 4 kHz, 4-Band parametric EQ with frequencies, Variable gain and bandwidth, Peak limiter: Protects the loudspeaker via the input of all individual power- and impedance data, Delay: Max. 50 ms, Digital gain: +10 dB / -100 dB, 20 Presets for the most popular speaker configurations, adjustable, Status LEDs: 2x Green: Signal / 2x Red: A/D Clip / 1x Blue: Indicates AC on, Inputs: 2x XLR and 2x 6.35 mm stereo jack, Outputs: 2x NL4, lockable (NL2 compatible) and 2x binding posts, Mono- or bi-amping connector, Protected circuit design and thermal protection, Power supply secured in case of instable power supply, Removable power cable (C13/safety plug), Dimensions (W x H x D): 483 x 89 x 259 mm, Design: 19
Les merAmpetronic C5-1, Induction Loop Amplifier, Digital interface for precise system setting, Highly energy-efficient class D amplifiers with low heat dissipation ensure low operating and maintenance costs, Built-in test tones, Automatic gain control, Compact 1U, Rack mount unit with internal transformer for easy rack mount, Optimised for speech frequencies with unsurpassed speech intelligibility, High quality music playback, Industry standard phoenix connectors, Data compliant with IEC 62489-1 Standard, 100V line input, Frequency range: 80Hz to 65kHz, Dimensions (W x D x H): 430 x 190 x 44 mm, Weight: 2.5 kg
Les merAvantone CLA-200, Studio Power Amp, Convection-cooled studio amplifier, Class AB, Power: 2 x 300 W at 4 Ohm, 2 x 200 W at 8 Ohm, Bridged Mono: 500 W at 8 Ohm, Frequency range: 20 - 20,000 Hz, THD: < 0.1%, Signal to noise ratio: > 94 dB, Inputs: 2x XLR female, Outputs: 2x XLR male Link, 2x screw terminal and 2x Speaker Twist, Dimensions: 483 x 457 x 89 mm, Format: 19
Les merDynacord SL1800, Power Amplifier, 2x 900 W/ 4 Ohm, 2x 550 W/ 8 Ohm, 2x 1250 W/ 2 Ohm, 1x 1800 W/ 8 Ohm (bridge mode), 2 Ohm compatible, Symmetrical XLR in/ out, Speaker twist out, Ground lift, Limiter, LPN Filter (low pass notch) protection, Temperature switch-off, DC protection, Fan, Weight: 16.3 kg, Dimensions: 483 x 88.1 x 421.5 mm, Format: 19
Les merYamaha PX8, Digital power amplifier, Power: 2x 1050 W / 4 Ohm, 2x 800 W / 8 Ohm, 2x 600W / 2 Ohm, Speaker presets provide an optimum loudspeaker performance, DSP Functions, Includes D-contour processing, Input: XLR + jack, Outputs: Speaker twist, jack, binding post, Dimensions: 480 x 88 x 388 mm, Design: 19
Les merViolectric HPA V202, Headphone Amplifier, 50 Volt internal operating voltage - ideal for high impedance headphones, High output power, for headphones with low impedances and magnetostats, +/- 18 dB pre-gain, 2700 mW Pmax at 50 Ohm, > 18 V RMS into 600 Ohm, Volume control with RK 27 potentiometer, Large 38 mm all-aluminium knob, Delayed switching of headphones after power-on, Integrated power supply, 2 Line inputs: XLR (L/R), 2 Line inputs: RCA (L/R), 1 Stereo headphone output: 4.4 mm Pentaconn unbalanced, 1 Stereo headphone output: 6.3 mm jack unbalanced, Dimensions (W x H x D): 170 x 65 x 252 mm, Weight: 3 kg
Les merSirus I-Amp 8.150T, 8 Channel Installation ampliier, Output: 8x 150 Watt @ 70/100V (RMS), Class-D Amp, Ideal for installations such as multi-zone applications, Safety circuits such as thermal, short-circuit, on/off muting, Euroblock input and output, Rear-mounted volume control and power switch, Signal, clip protection and power LEDs, Frequency range: 100 - 15,000 Hz, Input impedance: 20 kOhm balanced / 10 kOhm unbalanced, Dimensions (W x D x H): 483 x 360 x 44 mm, Rack mount size: 1
Les merCatchbox Plus Hub, Two-Channel Receiver, With graphical user interface, 1.8/1.9 GHz band, Built-in antennas, 1 USB-C line input, 1 3.5 mm mini jack line input, 2 XLR Mic outputs, 1 USB-C digital outputs, 1 RCA line output, Latency: 12 ms, Range: approx. 100 m, Kensington Lock, Stealth Mode, Dimensions (W x H x D): 184 x 40 x 92 mm, Weight: 300 g
Les merDynacord SL1200, Power Amplifier, 2x 600W/4 Ohm, 2x 380W/8 Ohm, 2x 900W/2 Ohm, 1x 1200W/8 Ohm bridge, 2 Ohm compatible, Balanced XLR in/ out, Speaker twist out, Ground lift, Limiter, LPN Filter (low pass notch) protection, Temperature switch-off, DC protection, Fan, Weight: 14.8 kg, Dimensions: 483 x 88.1 x 421.5 mm, Format: 19
Les merCrown Xti 2002, Power Amplifier, Controlled power: 2x 1000 W (2 Ohm), 800 W (4 Ohm), 475 W (8 Ohm), 1600 W Bridge 8 Ohm, 2000 W Bridge 4 Ohm, DSP applications: Input EQ 6 parametric filters per channel with adjustable Q-factor and +/- 15 dB Gain, Crossover with high- and low pass, Per channel with 6/12/18/24 dB per octave and switchable polarity, Output EQ with 8 parametric filters per channel with adjustable Q-factor and +/- 15 dB Gain, Delay up to 50 ms, Subharmonic Synth, Peak Plus limiters with adjustable threshold, attack and release, 50 Presets, 3 Steps switchable ventilation, HiQnet Band Manager and System Architect software control via USB port, Indicates the line voltage and power supply unit temperature, Connectors: 2x NL 4 Speaker Twist output binding post out, XLR in / out, Dimensions: 19
Les merDynacord L1300FD DSP, DSP Amplifier, 2 Ohm stable, Intuitive system control software for easy setup and control, Balanced XLR in/out, Speaker Twist connections, Dimensions (W x H x D): 483 x 88 x 462,4, Weight: 12.9 kg@+*Maximum power single channel:*@+@+, 2 Ohm: 1100 W, 2.6 Ohm: 950 W, 4 Ohm: 660 W, 8 Ohm: 350 W@+*Maximum power Dual Channel:*@+@+, 2 Ohm: 1000 W, 2.6 Ohm: 850 W, 4 Ohm: 600 W, 8 Ohm: 320 W, Bridged: 4 Ohm: 2000 W, Bridged 8 Ohm: 1200 W
Les merLake People G108 Headphone Amp, 1-Channel Headphone Amplifier, Balanced headphone amplifier (4 output stages), Supports headphones with impedances from 8 to 600 Ohm, Internal 7-way switchable gain, 25 mm All-aluminium knobs for volume and balance control, Toggle switch for stereo, mono or phase swap (left channel) switching, 2 Line inputs: XLR balanced, 2 Line inputs: RCA, 1 Stereo headphone output: 4-pin XLR balanced, 1 Stereo headphone output: 6.3 mm jack unbalanced, Dimensions (W x H x D): 168 x 47 x 165 mm, Weight: 1.4 kg
Les merSirus I-Amp 4.500T, 4-Channel Installation Amplifier, Power: 4x 480 Watt @ 70/100V (RMS), Class-D Amplifier, Low-noise and low-distortion due to high-current switching power, Protected circuit design: Thermal, short circuit, On/off muting, Limiter, Euroblock input and output, Front-panel gain controls for easy access, Signal, clip protection and power LEDs, Euroblock contacts for Disable / Priority / Failure Status, Frequency range: 100 - 15,000 Hz, Input impedance: 20 kOhm balanced / 10 kOhm unbalanced, Dimensions (W x D x H): 483 x 360 x 44 mm, Installation size: 1U rack 19
Les mer