Our 8″ Immersive Speaker combines high efficiency (95dB), immense output (600W) and a point-source principle. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. “ This speaker combines very wide dispersion, high power handling and a versatile design, perfect for surrounds and immersive ceiling installations. “ – Bjørn Erik Forberg, Chief Designer Our 8″ point source Immersive model utilises a combination of an ultra powerful 1,75″ compression tweeter and a hard punching 8″ woofer in a coaxial arrangement. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included. Equipped with high quality rugged connectors with banana inputs. Includes a versatile installation system with a rear-placed lock for wall- or ceiling mounting. Cable channels are located towards the top and bottom of the speaker. In addition, decoupling "pillows" are integrated to each corner to avoid direct contact with the wall or ceiling.
Our 8″ Immersive Speaker combines high efficiency (95dB), immense output (600W) and a point-source principle. The super wide dispersion (100º) makes it a perfect fit as LCR and / or immersive surround speakers. “ This speaker combines very wide dispersion, high power handling and a versatile design, perfect for surrounds and immersive ceiling installations. “ – Bjørn Erik Forberg, Chief Designer Our 8″ point source Immersive model utilises a combination of an ultra powerful 1,75″ compression tweeter and a hard punching 8″ woofer in a coaxial arrangement. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included. The speaker has an optional versatile installation bracket that allows for both ceiling- and wall installation with a great degree of flexibility.
Our 12″ Immersive Speaker combines high efficiency (98dB), immense output (700W) and a point-source principle. The wide dispersion (80º) ensures full frequency response for the entire audience even with close seating and large screens. “ The very high sensitivity of this driver design provides high SPL even at moderate amplification, while at the same time the 700W program power also allows for high power output for larger installations. “ – Bjørn Erik Forberg, Chief Designer Our 12″ point source Immersive model utilises a combination of an ultra powerful 2″ compression tweeter and a hard punching 12″ woofer in a coaxial arrangement. The 80º wide (conical) dispersion allows for close seating & large screens while maintaining full frequency coverage for the entire audience. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included, albeit if placed behind an acoustical screen we recommend removing the grille. The speaker includes a wooden bracket for wall-installations, and for ceiling-installation you can use our highly versatile bracket available as an accessory. Equipped with high quality rugged connectors with banana inputs.
NYHET! AVshop er ny importør av mediaplayermerket Zidoo, som har en rekke spennende funksjoner og topp kvalitet. Vi har disse i demo på showrommet, velkommen innom for en titt! Functional overview *430mm standard size, excellent texture with all-aluminum alloy brushed panel, frosted upper cover, thickened bottom and shockproof foot pad. *A new generation of Realtek RTD1619BPD Qual-core 64-bit A55 CPU with larger bus processing capacity and faster computing efficiency. *4G DDR4 + 64GB eMMC large memory, 64-bit bandwidth, system is fluent. *XMOS+ESS9068 DAC supports hard decoding DSD512/PCM 768KHz 32Bit/MQA. *Supporting MQA，SACD ISO (stereo), DSF, DFF, WAV, FLAC etc. and seamless playback and CUE track. *Supporting USB DAC in as good as high end audio decoders, it is also compatible with Windows 7/10/11, MAC OS and Android. *High-quality switching power supply + large toroidal linear power supply, which is specially designed for audio and video circuits independently to ensure strong power source and good signal output. *High-fidelity audio decoding supports XLR full balance and RCA analog audio output. *Dual HDMI audio and video separate output can enjoy 4K video and HD audio at the same time without upgrading AV amplifier. *Android 11 operating system has significantly improved system performance and stability, the operation is more free and smooth. *Large LED display panel, dual hidden NSS patented HDD bays and each HDD bay support capacity up to 16TB. *The built-in VS10 image quality engine supports Dolby Vision processing and mapping any image to colors similar to Dolby Vision, which greatly improves the image quality. *HDMI® 2.1 supports 4K 60Hz point-to-point output, HDR (HDR10/HLG/HDR10+/Dolby Vision), 12Bit, BT.2020 wide color range and YCbCr 4:4:4 color space. Supporting outputting raw three-dimensional multi-channel audio format based on object. *Processing HDR10 static metadata (MaxFall, MaxCll) more accurately which shows higher brightness and deeper black level. *Supporting acquiring and processing HDR10+ dynamic metadata, colors and brightness are obtained frame by frame and scene by scene. *More advanced Dolby Vision technology supports high-quality Dolby Vision low latency (LLDV) output, which can output the most suitable brightness for each frame and scene, shadow is darker while highlight is brighter, vision effect is amazing. *Automatic frame rate 23.976 and resolution ensures smooth movie playback without interruption. *Supporting external BD/DVD (unencrypted)/CD discs and CD ripping. *Complete BD/BD3D/UHD Blu-ray menu playback and Blu-ray seamless branching playback are supported. *Almost all common 3D video formats could be played, including MVC 3D (Blu-ray, MKV). *Graphics special effects subtitles are supported and subtitles brightness can be adjusted. Subtitles can be downloaded. Zidoo is the only one among the field to support BLURAY and MKV forced subtitle. *TIDAL connect music streaming and high-definition online video...
RX-A2A er Yamaha's 7-kanals hjemmekinoreceiver i AVENTAGE-serien. AVENTAGE-serien er de beste modellene fra Yamaha og benytter kun de beste komponentene, slik at forsterkeren gjengir lydsignalet med bedre presisjon. Du får klarere lyd som bringer deg tettere på musikken, og du opplever flere detaljer i filmene. Med HDMI 2.1 er RX-A2A klar til å vise bilder med 8K oppløsning. Dolby Atmos gir deg en tredimensjonal lydopplevelse og med 7 kanaler på 100 watt (8 ohm, 0.06% THD) er forsterkeren rustet til å drive de fleste høyttalere. Receiveren har også Yamaha sitt MusicCast system, som gir deg tilgang til moderne strømmetjenester, også i flere rom. MusicCast muliggjør også trådløse bakhøyttalere, slik at det er enkelt å sette opp kinoopplevelsen hjemme. 7.2 kanaler – 100 watt pr kanal (8 ohm, 0.06% THD) 7 HDMI-innganger HDMI 2.1* 8K/60Hz Dolby Atmos Dolby Atmos Height Virtualizer* DTS:X Yamaha MusicCast Airplay 2 Bluetooth Spotify Connect Tidal Wi-Fi eARC Platespillerinngang Multirom funksjon Zone 2 HDR 10+* Variable Refresh Rate (VRR)* Auto Low Latency Mode (ALLM)* Quick Frame Transport (QFT)* Quick Media Switching (QMS)* Stemmestyring Mulighet for trådløse bakhøyttalere Romkorreksjon Enestående lyd Fundamentet for å gi deg god lyd er forsterkerens kvalitet. Yamaha RX-A2A har 7 kraftige forsterkere som leverer 100 watt i hver kanal (8 ohm, 0.06% THD). Forsterkerne er konstruert med høy Slew Rate, som gjør at de er svært hurtige og responderer raskt på endringer i signalet. Dette er spesielt gunstig når man spiller høyoppløst musikk. Dolby Atmos, DTS:X og Dolby Atmos Height Virtualizer Dolby Atmos og DTS:X er surround-formater som har objekt basert koding, istedenfor kanalbasert koding slik som tidligere formater har hatt. Dette gir lyddesigneren mulighet til å nøyaktig plassere lyder hvor som helst i det tre-dimensjonale rommet. For de som ikke har anledning til å benytte ekstra høyttalere til å gjengi høyde-kanalene, kan man etter en firmware oppdatering benytte Dolby Atmos Height Virtualizer, som kan gjenskape en virtuell Dolby Atmos opplevelse ved hjelp av ditt 5.1 hjemmekinosystem. CINEMA DSP 3D til film, musikk og spill CINEMA DSP 3D er et unikt lydprogram utviklet av Yamaha. Ved å kombinere måledata fra berømte konsert arenaer og musikk klubber fra hele verden, med deres digitale signalprosessering kan du velge mellom flere lydinnstillinger som lar deg gjenskape atmosfæren fra en storartet konsert arena. Compressed Music Enhancer Når du spiller musikk fra lossy lydformater som MP3, er musikken både komprimert og informasjon har gått tapt fra signalet. Yamahas Compressed Music Enhancer utnytter sofistikerte algoritmer som skal gjenopprette informasjonen som har gått tapt, og lar deg nyte musikk med god kvalitet, selv om den er komprimert. Anti Resonance Technology Wedge Yamaha RX-A2A er utstyrt med en femte fot, plassert i midten under chassiset. Denne demper trafoens resonanser, samt vibrasjoner fra...
Our 8″ Immersive Speaker combines high efficiency (95dB), immense output (600W) and a point-source principle. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. “ This speaker combines very wide dispersion, high power handling and a versatile design, perfect for surrounds and immersive ceiling installations. “ – Bjørn Erik Forberg, Chief Designer Our 8″ point source Immersive model utilises a combination of an ultra powerful 1,75″ compression tweeter and a hard punching 8″ woofer in a coaxial arrangement. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included. Equipped with high quality rugged connectors with banana inputs. Includes a versatile installation system with a rear-placed lock for wall- or ceiling mounting. Cable channels are located towards the top and bottom of the speaker. In addition, decoupling "pillows" are integrated to each corner to avoid direct contact with the wall or ceiling.
NYHET! Ny, 18″ versjon av vårt lukkede subwoofer design! Fremdeles svært kompakt, med følgende endringer i mål sammenlignet med vår 15-toms versjon: Bredde: 48cm -> 56cm (+8cm) Høyde: 95cm -> 110cm (+15cm) Dybde: 30cm -> 35cm (+5cm) Subwooferen får i tillegg til en større driver også en langt kraftigere forsterker, som med sine 2x1600W (4Ohm) vil levere ekstrem ytelse. Dette er da den passive slaven som kan kobles på en aktiv 18-tommer. Our 18″ passive, sealed sub is an affordable, versatile sub that can either be powered by a dual channel master Hamrammr Sub 18 Active or another external power source.
FEATURES: patent pending FlexRange Technology options UTEN RANGE LIMITER (uten filter) our thickest panel – 7.3125” thick available sizes: 24.25″ x 48.5″, 24″ x 24″, or 12″ x 48″ weight: FULL RANGE = 19 lbs RANGE LIMITER = 21 lbs professionally constructed two-frame system and built-in air gap easy wall and corner installation using wire integrated in the back like a picture frame easy to install on ceiling with optional Cloud Mounting Bracket © (se under tilbehør) Class A fire rated – Click HERE for Fire Rating test results class A fire rated employs ECOSE® technology absorption material and is manufactured with LEED certified Columbia Forest Products (made in the USA) formaldehyde-free technology Monster Bass Traps in Home Studio The Monster Bass Trap with FlexRange Technology is our most effective panel, raising the bar for bass traps. Measuring in at a whopping 7.5” thick, the design of the Monster Bass Trap with FlexRange Technology allows it to be used in multiple quantities to absorb as much bass as possible without over absorbing the high end, which leaves life inside the room. With the Monster Bass Trap with FlexRange Technology , low end becomes clearer making it easier mix. No more guessing on bass levels during mix down. No more hassles trying to clean up nasty nulls and spikes that are common in all rooms. With new certified lab tests, the Monster Bass Trap with FlexRange Technology has a rating of 24 Sabins per unit – 50% more effective than our 244 Bass Trap with FlexRange Technology . There is no other product on the market that even comes close. Simulated sound waves strike the FRT Membrane When combined with our proprietary RANGE LIMITER membrane system, the Monster Bass Trap with FlexRange Technology absorbs up to 50% more low end (below 60Hz) and retains 75% more high end (from 400Hz and above) versus the broadband FULL RANGE option. While many commercially available products are simple fabric-wrapped panels, the Monster Bass Trap with FlexRange Technology is precision engineered and manufactured to exacting standards. We begin with a two-frame system that allows sound to travel behind the panel for greater low-frequency absorption. GIK Acoustics uses high-quality fabrics as our standard options as opposed to cheap burlap or microsuede. Our materials are Greensafe which means GIK products are easy on air quality for your room, the environment, and your budget. The Monster Bass Trap with FlexRange Technology hangs truly flush on the wall using an integrated wire on the back and can easily be mounted straddling corners (recommended) or as a cloud on the ceiling. Custom Monster Bass Traps in Norwegian Grammy Winner Espen Lind’s Oslo Studio designed by HdAcoustics Bob Katz of Digital Domain “The GIK Acoustics Monster Bass Trap was the perfect trap to reduce a resonance that I detected in studio B.” Bob Katz Mastering Engineer Digital Domain Website
Marantz MM7025 MM7025 er en 2-kanaler med 140W RMS (pr kanal) i 8 ohm og med stor båndbredde håndterer den lett komplekse lydformater som HD DTS Master Audio og Dolby TrueHD. Her får du et presist lydbilde med god dynamikk. Du får også XLR innganger, trigger og et Marantz-kontrollbussystem for fjernkontroll på/av. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-149378-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-149378 .so-panel { margin-bottom:30px } #pl-149378 .so-panel:last-of-type { margin-bottom:0px } #pg-149378-0.panel-has-style > .panel-row-style, #pg-149378-0.panel-no-style { -webkit-align-items:flex-start;align-items:flex-start } @media (max-width:780px){ #pg-149378-0.panel-no-style, #pg-149378-0.panel-has-style > .panel-row-style, #pg-149378-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-149378-0 > .panel-grid-cell , #pg-149378-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pl-149378 .panel-grid-cell { padding:0 } #pl-149378 .panel-grid .panel-grid-cell-empty { display:none } #pl-149378 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }
Our 12″ Immersive Speaker combines high efficiency (98dB), immense output (700W) and a point-source principle. The wide dispersion (80º) ensures full frequency response for the entire audience even with close seating and large screens. “ The very high sensitivity of this driver design provides high SPL even at moderate amplification, while at the same time the 700W program power also allows for high power output for larger installations. “ – Bjørn Erik Forberg, Chief Designer Our 12″ point source Immersive model utilises a combination of an ultra powerful 2″ compression tweeter and a hard punching 12″ woofer in a coaxial arrangement. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included, albeit if placed behind an acoustical screen we recommend removing the grille. The 80º wide (conical) dispersion allows for close seating & large screens while maintaining full frequency coverage for the entire audience. Equipped with high quality rugged connectors with banana inputs.
Vicoustic Super Bass Extreme benytter et helt spesielt membran-system tilpasset 60-160Hz for å takle lave frekvenser til tross for svært begrenset størrelse. Braketter for hjørnemontering medfølger. NB! Pris er for 1stk. Optimized for corner mounting, Super Bass Extreme VMT has six solid colors finishes allowing a neutral aspect that can be used in a greater variety of spaces by designers, looking for interior design compatibility. Designed to provide effective low frequency absorption between 60-160 Hz, it delivers maximum effectiveness between 75 -100Hz. The VMT front in this new version, provides sufficient mid-high frequency absorption to control corner reflections. When porous materials such as foam are applied to corners or walls, they become less efficient in dealing with low frequencies, because the particle velocity or air movement associated with long wavelengths is low. However, the sound pressure is at its maximum and Super Bass Extreme’s internal membrane transforms this high pressure fluctuations into air motion. The membrane sympathetically vibrates over a frequency range of 75-100 Hz, causing the air to pass through a layer of high-density foam that absorbs the low frequencies. Super Bass Extreme is highly recommended for smaller rooms with low frequency issues. The panel can be used in different corner positions and its modular structure allows further units to be added as required. Mer info >>
Our 8″ Immersive Speaker combines high efficiency (95dB), immense output (600W) and a point-source principle. The super wide dispersion (100º) makes it a perfect fit as LCR and / or immersive surround speakers. “ This speaker combines very wide dispersion, high power handling and a versatile design, perfect for surrounds and immersive ceiling installations. “ – Bjørn Erik Forberg, Chief Designer Our 8″ point source Immersive model utilises a combination of an ultra powerful 1,75″ compression tweeter and a hard punching 8″ woofer in a coaxial arrangement. The super wide dispersion (100º) makes it a perfect fit as immersive surround speakers. Our in-house designed high power X-over filter is carefully tuned to help balance the speaker response at the critical X-over point. A magnetic front grille is included. The speaker has an optional versatile installation bracket that allows for both ceiling- and wall installation with a great degree of flexibility.
NYHET! Ny, 18" versjon av vårt lukkede subwoofer design! Fremdeles svært kompakt, med følgende endringer i mål sammenlignet med vår 15-toms versjon: Bredde: 48cm -> 56cm (+8cm) Høyde: 95cm -> 110cm (+15cm) Dybde: 30cm -> 35cm (+5cm) Subwooferen får i tillegg til en større driver også en langt kraftigere forsterker, som med sine 2x1600W (4Ohm) vil levere ekstrem ytelse. Our 18″ active, sealed sub is both smart, powerful and precise. The 3200w amplifier allows for easily adding another passive Sub 18 at a combined, highly affordable solution. Our 18″ active model is supplied with a two channel 3200w amplifier, allowing for easily adding another passive sub 18 with each active sub. Cable management for power, signal and daisy chaining another passive sub is easy as there are cable channels on three locations (bottom and both sides). The removable rubber feet provides decoupling as well as spacing for hidden cables run underneath the sub. Our sub 18 is built in a very strong 25mm birch plywood material, providing it with the rigidness required for even the most demanding applications. The sub is also supplied with a neat, magnetic front cover, allowing it to also be placed free standing if not installed in a front baffle wall. The sub includes removable feet, as well as a cable management hole also at the bottom, allowing for hiding the power and signal cable.
REFERENCE 16-CHANNEL 200-WATT-PER-CHANNEL @8OHM / 400-WATT-PER CHANNEL @4OHM AMPLIFIER Reference 16-channel 200-watt-per-channel @8Ohm / 400-watt-per-channel @4Ohm amplifier. Pair with AV 10 to create an elite-level home theater. Marantz HDAM, Current Feedback Amplification, and balanced line level input. Key Features Peerless Performance Immersive spaciousness, warm and rich tone, extraordinary detail and lifelike dynamics are legendary hallmarks of Marantz sound. Technology Leader AMP 10 is engineered using best-inclass technologies to enable extraordinary power output; high channel count; and the dynamic, rich, warm sound for which Marantz is highly renowned. Exquisite Design A modern expression of timeless design principles, AMP 10 features the iconic Marantz porthole level meter, premium materials, and subtle sidelights that illuminate the front panel. Fra audioholics, mer offisiell info kommer snarlig: Marantz AV 10 15.4CH AV Processor Marantz is touting these products as the most powerful and customizable system to create your ultimate Home Theater. The AV 10 sports ALL immersive surround CODECs including Dolby Atmos, DTS:X Pro, Auro 3D and IMAX Enhanced. The AV 10 includes support for 4 independent subwoofer outputs which allows for independent delay and level trim and EQ. This is a first for any Marantz product as prior models like the AV8805 support up to two independent subwoofer outputs. The only other AV processor in this price range that supports 4 independent subwoofer outputs is the Anthem AVM90 . This is an incredibly useful feature for anyone wanting to integrate 4 subwoofers in their system to achieve the very best bass response across all listening seats. The AV 10 has just upped its room correction game with FULL DIRAC support (upgrade option) in addition to simultaneously supporting Audyssey MultEQx. This is the first time we've seen a product support both room correction systems. It begs the question if this spells the end of Audyssey as we know it IF consumers will prefer DIRAC as their go to room correction system. We've heard rumors that the user could use a combination of both Audyssey and DIRAC in conjunction but it's unclear how that would work. Is it possible a user can DIRAC calibrate their system and then apply Audyssey Dynamic EQ and Volume features? We aren't sure and will leave that topic open for debate until we can confirm with Marantz at CEDIA in a few weeks. The AV 10 is said to have 7/3 HDMI input/output, with ALL inputs supporting 8K / 60Hz and 4K / 120Hz passthrough. What is more shocking is that Marantz has allegedly redesigned the GUI (Graphical User Interface) for 4K/8K TVs. Most competitors simply don't support GUIs in their products in favor of web interface or app control. It takes a lot of processing power to support a GUI for high resolution applications so this speaks volumes for the tech baked into this product. Marantz AMP 16 16CH Amplifier Technical Specifications Multi-Room / CI IP Control /...
Our 15″ active, sealed sub is both smart, powerful and precise. The 1000w amplifier allows for easily adding another passive Sub 15 at a combined, highly affordable solution. Our 15″ active model is supplied with a two channel 1000w amplifier, allowing for easily adding another passive sub 15 with each active sub. Cable management for power, signal and daisy chaining another passive sub is easy as there are cable channels on three locations (bottom and both sides). The removable rubber feet provides decoupling as well as spacing for hidden cables run underneath the sub. Our sub 15 is built in a very strong 25mm birch plywood material, providing it with the rigidness required for even the most demanding applications. The sub is also supplied with a neat, magnetic front cover, allowing it to also be placed free standing if not installed in a front baffle wall. The sub includes removable feet, as well as a cable management hole also at the bottom, allowing for hiding the power and signal cable.
Bruksanvisning >> Quality is not a matter of size or budget. This impressively demonstrates our compact speaker model, the passive CCM6-P. The CCM6-P is a true high-performance speaker whose centerpiece is a heavy-duty 16,5 centimeter large coaxial driver, provenient from the area of professional PA technology. The genes of this advanced coax driver not only care for an amazingly great acoustic bandwidth, but also provide an efficiency of 93 dB (1 watt/1 meter). The effectiveness of the CCM6-P therefore allows for the combination with lower output power amplifiers. For this reason, this compact passive speaker from AiA is our top recommendation when it comes to the realization of smaller 3D home theaters operating with Dolby Atmos, Auro 3D or DTS:X. Another major advantage of the CCM6-P is its small depth of only 88 mm. This makes it the perfect choice for in-wall as well as on-wall assembly.
Lurer du på forskjellen på Cinema 50 vs. Cinema 40? Kort fortalt; Cinema 40 benytter separate effektkort per kanal, mens Cinema 50 benytter 2x effektkort som fordeler effekten til samtlige kanaler. I tillegg er selve prosesseringen av kanalene mer avansert på Cinema 40. Begge er imidlertid fantastisk gode receivere! Les mer om forskjellen her: https://simplehomecinema.com/2023/05/03/marantz-cinema-40-versus-marantz-cinema-50/ . Produktinformasjon Marantz CINEMA 50 Den nye CINEMA serien løfter Marantz sitt ekslusive design og uslåelige ytelse til helt nye høyder! CINEMA 50 er en hjemmekinoreceiver med 9x 110-watts forsterkning og 11.4-kanals prosessering, perfekt for kresne film- og musikkentusiaster som ønsker en hjemmekino som skaper en altoppslukende filmopplevelse med bilde og lyd i toppklasse. Enestående ytelse Oppslukende romfølelse, varm og fyldig lyd, ekstraordinære detaljer og naturtro dynamikk er legendariske kjennetegn ved Marantz-lyden. Ledende teknologi CINEMA 50 kommer med de nyeste altoppslukende lydformatene: 8K-video, romoptimalisering, streaming og mer teknologi for å forbedre ytelsen og brukeropplevelsen, og øke nytelsen din. Utsøkt symmetrisk design Et moderne uttrykk for tidløse designprinsipper: CINEMA 50 har et nytt og elegant design med det ikoniske Marantz-koøyet i sentrum. Egenskaper Antall effektforsterker-kanaler 9 Kanaler Antall forforsterker-kanaler 11.2 Farge Sort Integert DAC Ja Produsent Marantz Riaa Type MM
Lurer du på forskjellen på Cinema 50 vs. Cinema 40? Kort fortalt; Cinema 40 benytter separate effektkort per kanal, mens Cinema 50 benytter 2x effektkort som fordeler effekten til samtlige kanaler. I tillegg er selve prosesseringen av kanalene mer avansert på Cinema 40. Begge er imidlertid fantastisk gode receivere! Les mer om forskjellen her: https://simplehomecinema.com/2023/05/03/marantz-cinema-40-versus-marantz-cinema-50/ . Produktinformasjon Marantz CINEMA 40 Den nye CINEMA serien løfter Marantz sitt ekslusive design og uslåelige ytelse til helt nye høyder! Marantz CINEMA 40 er en premium hjemmekinoforsterker med 9x125-watts forsterkning og 11.4-kanals prosessering, ideell for en fullt dedikert hjemmekino som gir deg den ultimate filmopplevelsen med lyd og bilde i toppklasse. Enestående ytelse Oppslukende romfølelse, varm og fyldig lyd, ekstraordinære detaljer og naturtro dynamikk er legendariske kjennetegn ved Marantz-lyden. Ledende teknologi CINEMA 40 kommer med de nyeste altoppslukende lydformatene: 8K-video, romoptimalisering, streaming og mer teknologi for å forbedre ytelsen og brukeropplevelsen, og øke nytelsen din. Utsøkt symmetrisk design Et moderne uttrykk for tidløse designprinsipper: CINEMA 40 har et nytt og elegant design med det ikoniske Marantz-koøyet i sentrum. Frontpanelet i aluminium er ren luksus å ta på, og det gjenspeiler seg i alle aspekter av konstruksjonen. Egenskaper Antall effektforsterker-kanaler 9 Kanaler Antall forforsterker-kanaler 11.4 Farge Sort Integert DAC Ja Produsent Marantz Riaa Type MM
Bruksanvisning >> Quality is not a matter of size or budget. This impressively demonstrates our smallest speaker model, the passive CCM5-P. The CCM5-P is a true high-performance speaker whose centerpiece is a heavy-duty 13 centimeter large coaxial driver, provenient from the area of professional PA technology. The genes of this advanced coax driver not only care for an amazingly great acoustic bandwidth, but also provide an efficiency of 88 dB (1 watt/1 meter). The effectiveness of the CCM5-P therefore allows for the combination with lower output power amplifiers. For this reason, the smallest passive speaker from AiA is our top recommendation when it comes to the realization of smaller 3D home theaters operating with Dolby Atmos, Auro 3D or DTS:X. Another major advantage of the CCM5-P is its small depth of only 75 mm. This makes it the perfect choice for in-wall as well as on-wall assembly. SPECIFICATIONS (selection) Speaker type Time-coherent 5,25“ Coax One Point Source Principle Vented SPL 105dB Cont. / 108dB Peak Frequency range 85Hz to 20kHz (-3 dB) Sensitivity 88dB / 1W Power rating / Impedance 100W / 8 Ω Width x Height x Depth 240 x 360 x 75mm Weight 4kg All speakers are supplied with a front grille as standard Download specifications
Produktbeskrivelse Epson ELPLP89 - projektorlampe Produkttype Projektorlampe - UHE Designet for Epson EH-TW7300/9300 EH-TW7400/9400 @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-5509-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-5509 .so-panel { margin-bottom:30px } #pl-5509 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-5509-0.panel-no-style, #pg-5509-0.panel-has-style > .panel-row-style, #pg-5509-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-5509-0 > .panel-grid-cell , #pg-5509-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pl-5509 .panel-grid-cell { padding:0 } #pl-5509 .panel-grid .panel-grid-cell-empty { display:none } #pl-5509 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }
NYHET! AVshop er ny importør av mediaplayermerket Zidoo, som har en rekke spennende funksjoner og topp kvalitet. Vi har disse i demo på showrommet, velkommen innom for en titt! Functional overview *New chipset RTD1619BPD Quad-core 64bit high-performance processor. *HDMI® 2.1 4k 60Hz point-to-point output, HDR（HDR10/HLG/HDR10+/Dolby Vision) *12Bit, BT2020 wide color range, YCbCr 4:4:4 color space, truehd audio passthrough. *VS10 engine maps content to approximate Dolby Vision colours for significant image quality improvements. *upport SATA (3.5/2.5) hard drive up to 16T; Support external BD/DVD(unencrypted), CD discs. *Home Theater 4.0 with custom categories and management, movie trailers and soundtrack playback. *Lossless music playback DSD (SACD ISO, DSF, DFF), WAV, APE, DTS, etc. *Newly upgraded Music Player supports lossless playback and decoding, personalized setting and tracks data association matching. *support multiple ways of music streaming, such as DLNA，etc. *Android 11 OS has improved the system performance and stability greatly. *More accurate HDR10 static metadata (MaxFall,MaxCll) processing, highlights and shadows display with stark contrast. *Support HDR10+ dynamic metadata processing, images colors and brightness levels could be obtained accurately frame by frame and scene by scene. *Advanced Dolby Vision technology supports LLDV (Player Led) and Standard mode (TV Led) output. *Automatic frame rate 23.976 and resolution ensures smooth movie playback without interruption. *Support BD/BD3D/UHD full Blu-ray menu and complex MPLS structure Blu-ray seamless branching playback. *Support 3D video formats including MVC 3D (Blu-ray/MKV) *Support special effect subtitles, download subtitles online and exclusively support Blu-ray and MKV forced subtitles. *Support DRM Widevine L1: enjoy HD quality online video services. *Support network protocols like NFS, SMB v1/v2/v3, UPnP, Web DAV, and built-in SMB services. *Support standard WOL, two optional modes Power On mode and Standby mode. *Integrate to smart home smoothly with HDMI® CEC, RS232 and Control 4. *ZIDOO Controller APP (IOS and Android) controls media player easily. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-149423-0-0 , #pgc-149423-1-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pg-149423-0 , #pl-149423 .so-panel { margin-bottom:30px } #pl-149423 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-149423-0.panel-no-style, #pg-149423-0.panel-has-style > .panel-row-style, #pg-149423-0 , #pg-149423-1.panel-no-style, #pg-149423-1.panel-has-style > .panel-row-style, #pg-149423-1 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-149423-0 > .panel-grid-cell , #pg-149423-0 > .panel-row-style > .panel-grid-cell , #pg-149423-1 > .panel-grid-cell , #pg-149423-1 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pl-149423 .panel-grid-cell { padding:0 }...
Den nye CINEMA serien løfter Marantz sitt eksklusive design og uslåelige ytelse til helt nye høyder! Høy effekt og lav forvrengning Hver kanal er målt til 140W med 0,05% THD, Som gir både kraftfull dynamikk og virkeliggjør detaljer. Marantz lover 70% power ved alle kanaler drevet 11 Kanaler og Utallige Konfigurasjoner CINEMA30 har 11 forsterkerkanaler innebygget, men kan behandle opptil 13.4 kanaler, noe som gjør det enkelt å oppnå den perfekte høyttaler-oppsettet for rommet ditt. og du kan velge akkurat hvilke kanaler du velger å bruke de interne forsterkerne til. Design uten kompromiss HiFi-teknologier som HDMA SA-2, monolitiske symetriske forsterkere, strømforsyning med ringkjerne-trafo og mer for å løfte CINEMA30 som du sjeldent finner i receiver-markedet. Sound Master tunet og kalibrert for deg Premium og spesialtilpassede ingredienser valgt av Marantz Sound Master for å fange "the Most Musical Sound". Kraftfull kalibrering og tilpassings verktøy inkludert, lar deg få best mulig lyd ut av systemet ditt. Kompatibilitet 7 HDMI innganger plus digital, analog og Phono-innganger. Til og med Analog video og høyttaler og forforsterker-utganger, sikrer best mulig kompatibilitet mot hva enn du skulle koble til. Tidløst men moderne design Fremragende kvalitet både høres og sees. CINEMA30 er omhyggelig designet i Japan med kvalitets-materialer i en moderne innpakning.
NB! Dette er den ferdig monterte utgaven, lakkert i sort matt lakk. Bilder blir tatt så snart den er mottatt. NB! DRIVER OG FORSTERKER SELGES SEPARAT. NYHET! Etter vi utførte en kundeundersøkelse fant vi ut at mer enn 50% av våre kunder kunne tenke seg et ferdig utfreset DIY kit fra AVshop! Vi ønsker selvsagt å tilfredsstille dette behovet der første løsning ut er dette baffelvegg-tilpasset kabinettet tilpasset Hypex FA502 plateforsterker som brokobles i denne konfigurasjonen (se under tilbehør). Innfestingen er tilpasset Daytons nyeste 15" Ultimax driver som med sin lave FS (19,5Hz) og xmax på hele 22mm vil gi ekstremt god kontroll i de lavere registre.
PB-3000 er en portet subwoofer med 800W (RMS) og 2500W maks effekt. Her spiller det 13″ store element hardt og presist. Dette er en sub som spiller dypt og fungerer meget godt til film. Med teknologi fra SVS 16-Ultra-serien og 4000-serien, vinnerne av nesten alle tester og priser verden over, lar 3000-serien deg oppleve ultimat subwooferteknologi til en rimelig pris. Den byr på en helt ny, 13″ SVS-element med høy ekskursjon og 800 watt RMS (2,500 watt peak power) med en full diskret MOSFET-utgang for å klare frekvenser som ligger under terskelen for menneskelig hørsel uten å forvrenge. PB-3000 er den første SVS-subwooferen som er optimalisert med to bassporter for å maks luftstrøm, elementgang og ytelse, samtidig som potensialet for portturbulens elimineres. Kraftfull og raffinert bass som tar pusten fra deg. Designet spesielt for 3000-serien, gir Intelligent Control Interface (ICI) på baksiden av subwooferen tilgang til de viktigste funksjoner. Justeringer kan gjøres for volum utifra hva man lytter til for å få en riktig og balansert bassrespons basert på egne preferanser. Kompatibel med Apple® og Android®, lar den innovative PB16-Ultra appen deg oppleve det fulle potensialet i en av verdens beste subwoofere. Appen kan kontrollere alle DSP-funksjoner og lagrer dine egendefinerte forhåndsinnstillinger. Den enkleste måten å finjustere bass som overgår 16Hz ved referansevolum fra din favoritt lytteposisjon. Kobles sammen via Bluetooth. 3-bånds parametrisk EQ-kontroll gir deg nøyaktige justeringer av frekvenskurven. Brukerne kan forbedre ytelsen ved å eliminere topper, nuller, samt kunne løse andre utfordringer man skulle ha med rommet. Lagrer 3 egendefinerte forhåndsinnstillinger for film, musikk og f.eks. spill. 2-veis kommunikasjon mellom smarttelefon og subwoofer viser innstillinger i sanntid på både i app og på subwoofer. Vekt 44 kg Dimensjoner 67.4 × 58.7 × 79.5 cm Spesifikasjoner – Frontmontert 13" element – Intelligent Control Interface (ICI) – Frekvensrespons: 16-260 Hz ±3 dB (åpen) 18-260 Hz ±3 dB (lukket) – Portstørrelse: 2 x 3,5" – STA-800D2 forsterker med DSP – 800 watt RMS (kontinuerlig) og 2500 watt peak power – Effektivt drevet klasse D topologi – RCA stereo inngang / utgang med tolerant inngangsspenning – Banebrytende subwooferkontroll og bassregulering i en app for Apple og Android Tilbehør – Beskyttende ikke-resonerende grill – Gummiføtter for minimal overføring av resonans – Extra kraftig strømkabel – PB-3000 Subwoofer Manual – Oppstartsguide
SVS SB1000 Pro SVS SB-1000 Pro tilhører den rimeligste subwoofer-serien fra SVS. Den låner teknologi fra referanseserien 16-Ultra og gir deg en ytelse som setter en ny standard for hva som er mulig i denne prisklassen. SVS SB-1000 Pro har et lukket kabinett og er svært kompakt og plasseringsvennlig. Bassen er stram og presis slik at den henger godt med og er enkel å få til å spille godt sammen med de fleste høyttalere. Egenskaper Effekt i Watt (RMS) 300 Elemtstørrelse 12" Farge Sort Produktserie SVS 1000 Pro Subwooferserie Produsent SVS
Ci160QR Featuring KEF's sophisticated 'sit anywhere' Uni-Q driver array, which places the tweeter in the acoustic centre of the bass/midrange cone, this allows both the tweeter and woofer to act as a single point source that disperses the sound widely and evenly throughout the room. Together with the discreet Ultra Thin Bezel (UTB) design, offering the slimmest possible visible rim around the speaker, the Ci Q Series range gives you tremendous freedom to position the speakers where you please. Key Features UTB™ Ultra Thin Bezel 160mm (6.5in.) Uni-Q driver array 19mm (0.75in.) Aluminium dome tweeter and 'tangerine' waveguide Gold plated spring loaded binding posts Nominal Impedance 8 Ω Sensitivity 89dB (2.83V/ 1m) Frequency Response 38Hz - 34kHz (±6dB) 2pi/open-backed Crossover Frequencies 3.0kHz Drive Units LF: 160mm (6.5in.) HF: 19mm (0.75in.) Recommended Amplifier Power 10 - 125W Product external dimensions Diameter : 234.6mm (9.24in.) Depth : 98mm (3.86in.) Cut-out dimensions Diameter :196mm (7.71in.) Mounting depth from surface Product only: 91mm (3.58in.) Optional rough in frame RIF160R Net Weight 2.05kg (4.51lbs.) Unit measurement Piece Document Download User Manual Ci Series Pamphlet Ci Series Specification Sheet Ci Series Minimum Cabinet Volume Chart EASE GLL Data Product drawing
miniDSP is pleased to announce the latest merger of miniDSP's trademark digital processing with high quality headphone amplification. Featuring a full ten bands of powerful, flexible parametric EQ in a tiny bus-powered package, the IL-DSP is the mobile audiophile's perfect companion for laptop, tablet, or smartphone (macOS, Windows and Android supported). The inbuilt microphone for voice-calling ensures maximum mobile flexibility. Housed in a light-weight aluminum enclosure, the IL-DSP sports impeccable audio specifications of 120 dB signal-to-noise ratio and 0.0007% THD+N (mid-gain). 30 mW power output per channel is ample for IEMs and most portable headphones. High-resolution PCM and DSD formats are both supported. The ten bands of parametric EQ are configured with miniDSP's easy-to-use computer interface. The fully adjustable peaking and shelving filters allow adjustment of the audio band from the narrowest to the broadest control ranges, with up to 16 dB boost or cut in each band. This combination of DSP power, careful selection of high-quality components and a 32-bit audiophile DAC combine to create an unparalleled portable headphone experience. Features XMOS XCORE200 Multicore processor - Asynchronous USB audio CS43130 32bit DAC, 130dB DR, 0.0007%THD, 30mW power 3 button control for various action depending on the mode(Play/Stop/Next/Previous/Vol Up/Vol Down/DSP on&off); On-board digital microphone Win/Mac OSx plugin PCM/DSD audio streaming modes USB Audio Class 2.0 with ASIO drivers for Windows, driverless under MAC OSx and Linux Alsa 2.0, Android OTG support Product Downloads IL-DSP Datasheet IL-DSP User Manual What's in the box? 1 x IL-DSP headphone amplifier 1 x microUSB to USB Type C (15cm), 1 x microUSB to USB C (70cm), 1 x microUSB to USB A(15cm), 1 x cable clip USB ASIO driver, Plugins under the UserDownloads section @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-137690-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-137690 .so-panel { margin-bottom:30px } #pl-137690 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-137690-0.panel-no-style, #pg-137690-0.panel-has-style > .panel-row-style, #pg-137690-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-137690-0 > .panel-grid-cell , #pg-137690-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pg-137690-0 { margin-bottom:px } #pl-137690 .panel-grid-cell { padding:0 } #pl-137690 .panel-grid .panel-grid-cell-empty { display:none } #pl-137690 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }
Ci200RR-THX For the ultimate in Extreme Home Theatre, the formidable new Ci R Series has the jaw-dropping acoustic capabilities of the classic KEF floorstander it's named after, with all the drama and emotional intensity of full theatre sound quality. The Ci R Series consists of an in-ceiling speaker that can be combined with one of two in-wall models, and a sensational new powered subwoofer. As you might expect, its towering performance sets a new standard for custom installed speakers. With a 38mm(1.5inch) tweeter voice coil coupled to a vented aluminium dome with tangerine waveguide, and a woofer with absolutely massive magnet and Z-flex surround, the KEF Ci200RR-THX is an in-ceiling LCR capable of delivering a magical musical theatre experience even in the largest of rooms Ci200RR-THX is an in-ceiling speaker certified to THX ULTRA2 standard. A deep understanding of the filmmaking process and surround sound is at the very heart of every THX certified 2.1, 5.1 and 7.1 speaker system. Engineered with design characteristics of professional studio speakers, THX recreates the tonal balance of the filmmaker's final mix in your living room. The results? Action sequences are impactful, and dialogue-driven moments are natural and engaging. THX certified in-ceiling speakers deliver the appropriate frequency response and high output and imaging quality of a traditional box speaker. This provides the best of both worlds - THX surround sound performance from components that blend harmoniously with any room decor. Nominal Impedance 4 Ω Sensitivity 90dB (2.83V/ 1m) Frequency Response 33Hz - 28kHz (±6dB) open backed Crossover Frequencies 2.2kHz Drive Units LF: 200mm (8 in.) Uni-Q HF: 38mm (1.5 in.) Amplifier Power 10 - 190W Product external dimensions H x W x D : 290 x 132.6mm (11.42 x 5.22 in.) Cut-out dimensions 240mm (9.45 in.) Mounting depth from surface 126.5 mm (4.98 in.) Optional rough in frame RIF200R Net Weight 3.6 kg (7.94 lbs) Unit measurement Piece Document Download Ci200RR-THX Information Sheet EASE GLL DATA Ci Series Pamphlet Ci Series Specification Sheet User Manual Ci Series Minimum Cabinet Volume Chart Product drawing Remarks KEF reserves the right, in line with continuing research and development, to amend or change specifications. E&OE.; THX, the THX logo, and Ultra2 are trademarks of THX Ltd. THX and the THX logo are registered in the U.S. and other jurisdictions. All rights reserved. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-6381-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-6381 .so-panel { margin-bottom:30px } #pl-6381 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-6381-0.panel-no-style, #pg-6381-0.panel-has-style > .panel-row-style, #pg-6381-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-6381-0 > .panel-grid-cell , #pg-6381-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 }...
The CCRM6-P presents itself in small to medium-sized rooms as the state of today’s technology. With an efficiency of 95 dB/1 W it lives up to its name. Constant sound pressure levels up to 114 dB and peak levels of 119 dB pose for the CCRM6-P no great difficulty. Experience movies or music as if you were on spot. Equipped with a two-way coax driver optimized for in and on-wall mounting, and featuring a 165 mm mid-woofer and a centrically arranged 25 mm soft-dome tweeter, the CCRM6-P cannot hide his professional provenience. With an optimized dispersion characteristic, absolutely balanced frequency response and impressive detail resolution, this Immersive Audio speaker effortlessly puts itself at the top of its price class. CCRM6-P – A quality that guarantees you enjoyment and reliability at the highest level. SPECIFICATIONS (selection) Speaker type Time-coherent 6,5“ Coax One Point Source Principle Vented SPL 114dB Cont. / 119dB Peak Frequency range 80Hz to 20kHz (-3 dB) Sensitivity 95dB / 1W Power rating / Impedance 350W / 8 Ω Width x Height x Depth 300 x 490 x 100mm Weight 6kg All speakers are supplied with a front grille as standard Download specifications
The SMS10-P with its closed cabinet concept offers a rock-solid bass sound from smallest dimensions, easily integrable behind screens and in other restricted installation situations. With its small depth of 10 mm, it is also ideal for in and on-wall installation and can also be screwed to the ceiling directly through the front via its continuous screw guides. Its impressive dynamics complements the lively performance of its monitor counterparts to a homogeneous and unique sound experience. The solid enclosure, constructionally optimized for its specific areas of application, ensures exceptionally stable conditions of operation, so that discolorations of the sound now are a thing of the past. SMSG10-P – Your entry into the world of AIA subwoofers. SPECIFICATIONS (selection) Speaker type 10“ woofer Principle Sealed SPL 110dB Cont. / 112dB Peak Frequency range 35Hz to 250Hz (-3 dB) Sensitivity 88dB / 1W Power rating / Impedance 1000W / 8 Ω Width x Height x Depth 410 x 440 x 100mm Weight 9kg All speakers are supplied with a front grille as standard Download specifications
NYHET! AVshop er ny importør av mediaplayermerket Zidoo, som har en rekke spennende funksjoner og topp kvalitet. Vi har disse i demo på showrommet, velkommen innom for en titt! Functional overview *New chipset RTD1619BPD Quad-core 64bit high-performance processor. *4GB DDR4 large memory and 32GB eMMC internal storage, smooth playback, masses of applications installation. *Android 11 OS has improved the system performance and stability greatly. *Brushed metal panel with large LED display, built-in high quality switching power supply. * Large-capacity NSS patented HDD bay, supporting hard drive up to 16TB, with hidden WiFi and Bluetooth antenna. *HDMI® 2.1 supports 4k 60Hz point-to-point output, HDR（HDR10/HLG/HDR10+/Dolby Vision), 12Bit, BT2020 wide color range, YCbCr 4:4:4 color space, truehd audio passthrough. *VS10 engine maps content to approximate Dolby Vision colours for significant image quality improvements. *HDR10 static metadata (MaxFall, MaxCll) processing, rendering higher brightness and deeper black levels. *Support HDR10+ dynamic metadata processing, images colors and brightness levels could be obtained accurately frame by frame and scene by scene. *Support automatic frame rate and resolution switching to ensure smooth video playback. *Support SATA/USB hard drives(3.5/2.5), up to 16TB; Support external BD(unencrypted)/ CD discs. *Support BD/BD3D/UHD full Blu-ray menu and complex MPLS structure Blu-ray seamless branching playback. *Almost all 3D video formats are supported, including MVC 3D (Blu-ray, MKV). *Support lossless music playback in DSD (SACD ISO, DSF, DFF), WAV, APE, DTS, etc. *Support special effect subtitles, subtitles online download and exclusively support Blu-ray and MKV forced subtitles. *support multiple ways of music streaming, such as DLNA，etc *Home Theater 4.0 user interface, with custom categories and management, movie trailers and soundtrack playback. *Newly upgraded Music Player supports lossless playback and decoding, personalized setting and tracks data association matching. *Support HDMI® CEC, RS232, Control 4, seamlessly access to smart home. *ZIDOO Controller APP IOS and Android versions control media player easily. * Support network protocols like NFS, SMB v1/v2/v3, UPnP, Web DAV, and built-in SMB services. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-149443-0-0 , #pgc-149443-1-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pg-149443-0 , #pl-149443 .so-panel { margin-bottom:30px } #pl-149443 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-149443-0.panel-no-style, #pg-149443-0.panel-has-style > .panel-row-style, #pg-149443-0 , #pg-149443-1.panel-no-style, #pg-149443-1.panel-has-style > .panel-row-style, #pg-149443-1 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-149443-0 > .panel-grid-cell , #pg-149443-0 > .panel-row-style > .panel-grid-cell , #pg-149443-1 > .panel-grid-cell ,...
HAMRAMMR - DYNAMISK OG MUSIKALSK TIL EN FORNUFTIG PRIS! Se hva noen av våre fornøyde kunder sier om systemet! Kjetil Moen, 10.12.2021 Har hatt Hamrammr i kinoen min en stund nå og er veldig fornøyd. Har tidligere hatt Arendal og det var en stor oppgradering å bytte til Hamrammr. Anbefales på det sterkeste. Rudi Placht, 19.01.2022 Jeg har mer eller mindre bodd i kinorommet siden vi ble ferdige. Det er helt magisk. Broren min jobber som lydteknikker på norske spillefilmer, og han ble helt blåst av banen. Petter Liøkel , 22.04.2022 Kjøpte Hamrammr Immersive 8_2 som LCR i ett kino oppsett. Fantastisk lyd med gode detaljer og fantastisk spredning. Anbefales. Kjøpte Immersive 8 som Surround/Atmos i ett 7.1.4 oppsett. Hamrammr har tatt mine tidligere Atmos opplevelser til ett helt nytt nivå. Atmos «bobblen» er endelig på plass og detaljene i lyden er fantastisk. Kjøpte Sub Sealed 15 pluss den passive suben til ett 7.1.4 oppsett. Her satte Hamrammr prikken over i’en. Nå snakker vi hjemmekino. Disse sammen med 3 x 8_2 og 8 x 8 i min 15 kvm store hjemmekino er helt perfekt. Roger Grude, 26.04.2022 Endelig høyttalere som jeg alltid har ønsket, men ikke vært tilgjengelig uten noe form for DIY. Her snakker vi skikkelig kino lyd til det jeg vil si er en overkommelig prisen. Har hatt litt forskjellige høyttaler oppsett i kinoen, og Hamrammr leverer bare helt rått med dynamikk og fylde i lyden! Så her har utvikleren BEF og avshop virkelig noe å være stolte over. Spille vannvittig høyt? Null stress! Dette mener pressen om systemet Hamrammr vinner i kategorien for Årets Surround Høyttalersystem for 2022-2023 i Lyd & Bilde. Les mer om kåringen her >> . Testen kan leses i sin helhet her >> Testen kan leses i sin helhet her >> Hamrammr vinner Årets Produkt for 2022-2023 i Stereo+. Les mer om kåringen her >> . Hamrammr imponerer stort i første Internasjonale test der HemmaBio gir serien 10 av 10 stjerner og sin varmeste anbefaling. Testen, som vi synes var svært godt skrevet, kan du kjøpe i sin helhet her >> . HAMRAMMR Hamrammr ( https://www.hamrammr.com ) er en ny skandinavisk satsning, utviklet av mangeårige ekspert og entusiast, Bjørn Erik Forberg (BEF). Vi har nylig installert et komplett 7.1.2-system i ett av våre mindre demorom bestående av Immersive 8 rund baut samt 2stk Sub 15 i aktiv og passiv utgave. Dette systemet er klart for demo, velkommen innom. Vi har nå også sluttført konstruksjonen av vårt nye referanserom. Dette rommet er lydisolert fullt ut med DreamScreens ProSilence-system og er utstyrt med et virkelig heftig lydsystem fra Hamrammr bestående av: Immersive 12 i samtlige kanaler, som da inkluderer 2x wides, 3x LCR, 4x surround og 6x Dolby Atmos, totalt 15 kanaler pluss sub. 8stk subwoofere installert i en baffelvegg i front og i et såkalt Single Bass Array (SBA) oppsett. Dette konseptet består i å dekke frontveggen i størst mulig grad med subwoofere, samt heldempe så dypt som mulig på bakveggen. I vårt tilfelle demper vi med 60cm, hvilket...
NYHET! AVshop er ny importør av mediaplayermerket Zidoo, som har en rekke spennende funksjoner og topp kvalitet. Vi har disse i demo på showrommet, velkommen innom for en titt! Functional overview *New chipset RTD1619BPD Quad-core 64bit high-performance processor. *4GB DDR4 large memory and 32GB eMMC internal storage, 64-bit bandwidth, super fast. *Android 11 OS has improved the system performance and stability greatly. *HDMI audio and video separate output, enjoy 4K video and HD audio without upgrading AV receiver. *Brushed metal panel with large LED display, built-in high quality switching power supply. *Large-capacity NSS patented HDD bay, supporting hard drive up to 16TB, with hidden WiFi and Bluetooth antenna. *Support MQA, SACD ISO, DSF, DFF, WAV, FLAC, etc. Support seamless playback and CUE track. *HDMI 2.1 4k 60Hz point-to-point output, HDR （ HDR10/HLG/HDR10+/Dolby Vision) *Support 12Bit, BT2020 wide color space, YCbCr 4:4:4 color space, truehd audio passthrough. *VS10 engine maps content to approximate Dolby Vision colours for significant image quality improvements. *More accurate HDR10 static metadata (MaxFall,MaxCll) processing, highlights and shadows display with stark contrast. *Support HDR10+ dynamic metadata processing, images colors and brightness levels could be obtained accurately frame by frame and scene by scene. *Support accurate frame rate 23.976 and resolution automatic switching ensures smooth movie playback without interruption. *Support 3D video formats including MVC 3D (Blu-ray/MKV). *Support BD/BD3D/UHD full Blu-ray menu and complex MPLS structure Blu-ray seamless branching playback. *Support 3D video formats including MVC 3D (Blu-ray/MKV). *Support special effect subtitles, download subtitles online and exclusively support Blu-ray and MKV forced subtitles. * support multiple ways of music streaming, such as DLNA，etc *Home Theater 4.0 with custom categories and management, movie trailers and soundtrack playback. *Newly upgraded Music Player supports lossless playback and decoding, personalized setting and tracks data association matching. *Support HDMI CEC, RS232, Control 4, seamlessly access to smart home. *ZIDOO Controller APP IOS and Android versions control media player easily. * Support network protocols like NFS, SMB v1/v2/v3, UPnP, Web DAV, and built-in SMB services. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-149441-0-0 , #pgc-149441-1-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pg-149441-0 , #pl-149441 .so-panel { margin-bottom:30px } #pl-149441 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-149441-0.panel-no-style, #pg-149441-0.panel-has-style > .panel-row-style, #pg-149441-0 , #pg-149441-1.panel-no-style, #pg-149441-1.panel-has-style > .panel-row-style, #pg-149441-1 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-149441-0 > .panel-grid-cell , #pg-149441-0 > .panel-row-style >...
NYHET! Alcons fortsetter satsningen innen hi-end hjemmekino, screening og studio og lanserer nå en lukket 18" subløsning som har in-room respons sub 10Hz! Dette klarer de ved bruk av en helt ny, spesialdesignet driver med over 30mm xmax, dual 2Ohms coiler og generelt ekstrem byggekvalitet. I kombinasjon med Alcons proprietære kontrollsystem (SIS) oppnår du en dempningsfaktor på >10.000 og dermed en ekstrem kontroll på driveren til tross for at selve effekttrinnet plasseres et annet sted (ofte på teknisk rom). Leveres enten i standard dimensjoner (0,8x0,733x0,45m), eller i en baffelvegg tilpasset, slim utgave (måler 1,2x1x0,27m). "Slim" utgaven har en høyde på 1,2m, bredde på 1m og dybde på 0,27m og egner seg derfor godt for installasjon i en baffelvegg. Standardutgaven bygger 0,8x0,733x0,45m og egner seg godt til litt dypere baffelvegger er frittstående installasjoner. Informasjon fra produsent: Reference-quality LFE subwoofer system Extended in-room frequency response down to below 10 Hz Superb impulse response for most realistic sound experience Single 18” extreme-excursion woofer with dual 3” voice-coils SIS™ pre-wired for very high system damping factor (10.000) Available in space-economic design, with 27,5cm/10.8” depth Product description The CRMS-LFE18 is a large-format reference subwoofer system for very demanding listening applications, delivering a super accurate bass and sub response for a maximum quality audible and sensible performance. Specific attention has been paid to obtain a linear response in the operating bandwidth, while handling ultra-low frequency transients with maximum control. The 18” custom-designed woofer features a large motor structure with dual 3” voice-coils offering an extreme excursion of 30 mm / 1.2-in. resulting in a 10 dB more excursion capability than a traditional (pro) 18” woofer. ( not included in SPLpeak spec ). The direct-radiating transducer mounted in the internally-stiffened, sealed cabinet enables an in-room response below 10 Hz; The superb impulse response is a perfect match with the ultra-fast transient response of the Alcons pro-ribbon systems. The 4 ohms impedance caters for maximum amplifier efficiency. For full system performance, the CRMS-LFE18 is to be driven and controlled by the ALC amplified loudspeaker controller; Driven by the ALC, the CRMS-LFE18 delivers maximum sound quality and output power with long-term operation reliability. The integrated factory presets in the drive processor of the ALC offer optimisation settings, as well as VHIR™ processing for perfect phase-matching with an Alcons pro-ribbon system. The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS-LFE18 and ALC, significantly increasing response accuracy and reducing both linear and non-linear distortion to an absolute minimum, regardless of cable length and system impedance. The combination of CRMS-LFE18 and ALC delivers the most accurate reproduction for even the lowest...
Produktinformasjon Marantz CINEMA 60 Den nye CINEMA serien løfter Marantz sitt ekslusive design og uslåelige ytelse til helt nye høyder! Cinema 60 er en 7.2-kanals receiver med 100 watt pr kanal. Dolby Atmos, DTS:X, 8K Ultra HD, og HEOS-streaming innebygd. CINEMA 60 er en svært kapabel AV-receiver enten du har et dedikert hjemmekino-rom eller ønsker kinolyd i stua. Enheten finnes i to utgaver, Cinema 60, og Cinema 60 DAB. Enestående ytelse Oppslukende romfølelse, varm og fyldig lyd, ekstraordinære detaljer og naturtro dynamikk er legendariske kjennetegn ved Marantz-lyden. Ledende teknologi CINEMA 60 kommer med de nyeste altoppslukende lydformatene: 8K-video, rom-optimalisering, streaming og mer teknologi for å forenkle og heve nytelsen din. Utsøkt symmetrisk design Et moderne uttrykk for tidløse designprinsipper: CINEMA 60 har et nytt og elegant design med det ikoniske Marantz ko-øyet i sentrum. Egenskaper Antall effektforsterker-kanaler 7 Kanaler Antall forforsterker-kanaler 7.2 Effekt i Watt (RMS) 100 Farge Sort Integert DAC Ja Produsent Marantz Riaa Type MM
Produktinformasjon Marantz CINEMA 60 DAB Den nye CINEMA serien løfter Marantz sitt ekslusive design og uslåelige ytelse til helt nye høyder! Cinema 60 er en 7.2-kanals receiver med 100 watt pr kanal. Dolby Atmos, DTS:X, 8K Ultra HD, og HEOS-streaming innebygd. CINEMA 60 er en svært kapabel AV-receiver enten du har et dedikert hjemmekino-rom eller ønsker kinolyd i stua. Enheten finnes i to utgaver, Cinema 60, og Cinema 60 DAB. Dette er utgaven med DAB-radio Enestående ytelse Oppslukende romfølelse, varm og fyldig lyd, ekstraordinære detaljer og naturtro dynamikk er legendariske kjennetegn ved Marantz-lyden. Ledende teknologi CINEMA 60 kommer med de nyeste altoppslukende lydformatene: 8K-video, rom-optimalisering, streaming og mer teknologi for å forenkle og heve nytelsen din. Utsøkt symmetrisk design Et moderne uttrykk for tidløse designprinsipper: CINEMA 60 har et nytt og elegant design med det ikoniske Marantz ko-øyet i sentrum. Egenskaper Antall effektforsterker-kanaler 7 Kanaler Antall forforsterker-kanaler 7.2 Effekt i Watt (RMS) 100 Farge Sort Integert DAC Ja Produsent Marantz Riaa Type MM
NYHET! NEO er Zidoos nyeste hybrid hi-fi og mediaspiller der de ypperste av komponenter er benyttet for maksimal lydkvalitet. Bildekvaliteten er jo i tillegg godt kjent som en av markedets aller beste. Spilleren fikk årets (2022) EISA-pris, og har vunnet en rekke øvrige tester: https://www.zidoo.tv/Product/reviews/model/NEO+S/target/W7ysLPE4pF1KKmVViAFMcQ%3D%3D.html. NEO S is a new product which is all-round, high-performance and cost-effective Provide excellent audio and video quality to users NEO S is an all-in-one device with functions like HiFi music digital decoding, streaming playback, headphone amplifier functions and movie playback NEO S inherits NEO X's craftsmanship with aluminum thickened chassis and 5-inch OLED Built in with SSD, dual ES9068 DAC, dual digital/analog power supply modules and toroidal power supply Product Design Wonderful craftsmanship Solid chassis with aluminum alloy CNC structure Large OLED screen 5-inch OLED HD display with touch screen Anti-vibration design Resonance suppressing stiffener structure Shock-absorbing foot pads Technological aesthetics Beautiful modular professional circuit design Unique shielding treatment High Speed SSD NEO S is equipped with a 256G high speed SSD for local music playback. High-quality music files can be easily stored, data reading is stable and fast. Heating and noise problem of traditional mechanical hard disk can be avoided OLED Touch Screen The 5-inch OLED high-definition colorful touch screen is beautiful embedded full-screen design. Practical operations can be done with the collaboration of knobs, such as audio source switching, volume adjustment, system setting and playback status display Fever grade dual ES9068 DAC NEO S firstly uses two ES9068 DAC as the core of audio decoding. Two-channel audio is decoded independently to avoid interference and get better SNR and dynamic range. Supporting up to DSD512, PCM768@32bit and three-layer 8 times expanded MQA encoding format hardware decoding Dual Discrete Power Supplies Separate digital and analog power supplies to eliminate interference which significantly improves the sound purity Linear power supply designed for analog audio circuits which is composed of multi-winding large toroidal transformers Switching power supply with lower ripple and magnetic leakage interference Multiple digital inputs Multiple ports including USB DAC, Optical, Coaxial and AES/EBU input Support various devices like turntables and CD players Perfect sound quality by the dual high-performance DAC Asynchronous USB DAC NEO S is just a good solution for PC HiFi enthusiasts USB DAC input supports asynchronous digital signal processing Which can be used as a sound card when connected to PC Also a professional USB DAC for IOS/Android phones or tablets via OTG High-performance headphone amplifier Monitor amp module is built in NEO S, 4.4 balance and 6.35 headphone jacks are available. Fully-balanced voltage design and graded amplified current provide high...
Ren kraft og presisjon. A6A er nøye utformet slik at hvert underholdningselement er optimalt. Fra dempet hvisking til lyden av raske bevegelser på skjermen sikrer A6A at du ikke går glipp av noe som helst. LYD UTEN SIDESTYKKE SURROUND:AI™ Analyserer innholdet i scenen og optimaliserer surroundeffekten til spesifikke lydelementer, som bakgrunnsmusikk, dialog og lydeffekter. Det er som å ha en profesjonell lydtekniker som finjusterer lyden i henhold til scenen. 64-biters behandling med Qualcomm® QCS407. Utviklet for klarhet Den nyutviklede Anti Resonance Technology (A.R.T.), H-kryssrammen og den mekaniske strukturen er et solid forsvar mot interne og eksterne vibrasjoner som påvirker lyden. Opplev krystallklar lyd som beveger deg mens AV-mottakeren din står helt stille. Digitale komponenter av høy kvalitet Qualcomm® QCS407 tar lyden til AV-mottakeren din til neste nivå med støtte for Dolby Atmos® og DTS:X®. SABRE ES9026 PROs reduserer støy til et minimum så selv de mest delikate lydene kommer godt fram, mens SABRE ES9007S Premier Audio DAC gir overlegent signal til støy-forhold og høyt dynamisk område for lyd av profesjonell kvalitet. AURO-3D* Ta underholdningsopplevelsen din til neste nivå som gjengir 3D-lyd nøyaktig med førsteklasses effekt på alt slags innhold. Få adgang til en verden er hvert fantastiske øyeblikk ikke bare høres, men føles. *Denne funksjonen er tilgjengelig via en fastvareoppdatering. LÆR MER FILMER OG SPILL SLIK DU ALDRI HAR SETT DEM 8K/60 Hz, 4K/120 Hz Muliggjør en høyere oppløsning og oppdateringsfrekvens, noe som gir deg en jevnere og mer realistisk seeropplevelse. HDR10+* Gir dypere kontrast og mer realistiske bilder, slik filmskaperen så det for seg. Dedikerte spillfunksjoner (ALLM, VRR, QMS, QFT)* Sørger for sømløse bevegelser og overganger for å yte bedre. Flere HDMI-innganger med nyeste teknologi* Alle HDMI-inngangene støtter den nyeste HDMI-teknologien så du kan koble til flere av de mest moderne spillkonsollene samtidig. *Disse funksjonene er tilgjengelig via en firmware-oppdatering. LÆR MER ENKEL Å KONFIGURERE, ENKEL Å BRUKE MusicCast-appen Bruk mobilen til å utforske hvor mye du kan gjøre med lyd i flere rom, til å styre AV-mottakeren, og få tilgang til kildene og strømmeenhetene dine. Talestyring Fungerer med Alexa og Google Assistant, slik at du alltid har kontrollen over AV-mottakeren. Du kan bruke AirPlay 2 til å strømme musikken din med talestyring via Siri fra en Apple iOS-enhet. *Tilgjengelighet varierer ut fra sted. AV Setup Guide-app (Installasjonsguide) Gir deg eksperthjelp gjennom installasjonen, kabelforbindelser og forskjellige andre innstillinger. LÆR MER DESIGNET FOR DITT ROM YPAO™-R.S.C. med flerpunktsmåling og presisjons-EQ Kalibrerer lyd til rommet ditt ved å analysere romakustikken og måle høyttaleregenskapene. Denne funksjonen optimaliserer også lydparametrene for maksimal ytelse fra SURROUND:AI™, Dolby Atmos® og DTS:X®. Kompatibel med trådløs bakre høyttaler Gir deg friheten til å plassere...
NYHET! Superkraftig 15" driver fra Hamrammr med FS nede i 19,5Hz, xmax på hele 19mm og 800W RMS. Informasjon fra produsent: Highlights Sweeps massive amounts of air! Over 1-1/2" of total cone travel 800 watts RMS power handling The latest in subwoofer technology Dual linear stiffness spiders limit distortion and rocking modes Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting If you want outrageous amounts of bass, you gotta move some air The Hamrammr Sub15 Series of dual voice coil subwoofers, from Hamrammr, are not for the faint of heart. Built using the latest in subwoofer technology, Hamrammr subwoofers are the pinnacle of low frequency driver design. An Hamrammr subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass. The versatility you need for mobile, home, or pro subwoofer excellence Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility. Built to produce massive low frequency output and keep on doing it To improve power handling, increase thermal management, and reduce power compression, Hamrammr designed the SUB-series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils. Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation. Cabinet recommendations: • Sealed 3.1 cubic ft. (net internal) with 3 lbs. of Acousta-Stuf polyfill, f3 of 35 Hz with a 0.707 Qtc alignment • Vented 6.0 cubic ft. (net internal, not including driver or port volume) with 6 lbs. of Acousta-Stuf tuned to 18 Hz with two 4" diameter by 26" long flared ports for an f3 of 22 Hz. Larger cabinets and lower tuning frequencies are possible. Note: All parameters derived with voice coils wired in series. Product Specifications Nominal Diameter 15" Power Handling (RMS) 800 Watts Power Handling (max) 1600 Watts Impedance 4 ohms Frequency Response 15 to 1,000 Hz Sensitivity 86.5 dB 2.83V/1m Voice Coil Diameter 2.5" Thiele-Small Parameters Resonant Frequency (Fs) 19.5 Hz DC Resistance (Re) 3.4 ohms Voice Coil Inductance (Le) 1.31 mH Mechanical Q (Qms) 2.40 Electromagnetic Q (Qes) 0.59 Total Q (Qts) 0.47 Compliance Equivalent Volume (Vas) 7.92 ft.³ Mechanical Compliance of Suspension (Cms) 0.24 mm/N BL Product (BL) 15.4 Tm Diaphragm Mass Inc. Airload (Mms) 279.4g Maximum Linear Excursion (Xmax) 19 mm Surface Area of Cone (Sd) 814.6 cm² Materials of...
