NYHET! AutoCalc lar deg automatisk beregne ditt materialbehov for en komplett lydisolasjon av ditt rom >> NB! Husk å bestille applikatorpistolen også (tilbehør) da GreenGlue tubene er for stor for vanlige applikatorer. Hver tube (langt større enn standard tuber) inneholder 28oz = 0,83l masse. Det anbefales at en benytter mellom 2 tuber pr. standard gipsplate (1,2x2,4m), hvilket betyr at du bør beregne rundt 0,6 tuber pr. kvm. Skal du altså f.eks. dekke en vegg på 15kvm og benytter 2 tuber pr. gipsplate kjøper du 15x0,6=9 tuber. Datablader & rapporter: UL Flame and SMoke Generatation for Green GLue compound and Sealant 2016-05-10 CARB 310 Green Glue Noiseproofing Sealant saintgobain-214-08-031_VOC Emission BPD3 Green Glue greenglue_leed_report_2_0 Informasjon fra produsent (engelsk): Green Glue is a liquid, waterborne, viscoelastic damping compound which represents the highest performance product of it's type. We are aware of no product available to the construction market which can deliver damping levels even 30% as high as those offered by Green Glue. It is also significantly lower in applied cost than competitive products, giit a good cost/performance ratio in the damping of normal construction mateving rials such as drywall, wood products, etc. Finally, it is remarkably tolerant to real-world application conditions and carries almost none of the burden of precision required by many damping systems. - Non toxic - No mixing required - Simple, familiar, "caulk gun" application - Considerably reduced application cost - Light material squeezes from tubes easily low worker fatigue Walls and Ceiling - Improved sound isolation - Constructions with outstanding low frequency isolation are possible - Thoroughly lab tested - Eliminates short circuit risk in resilient channel walls - Allows construction of the highest performance walls possible (in combination with double stud walls) - Reduction in structure-borne sound - Low cost product = great $$$/performance Floors: - Reduced impact noise - Improved resistance to airborne sound - Lower in cost than most floor treatments - Reduction in structure-borne sound Other Applications: - Tremendous performance is risers, equipment platforms, stages, and other unique structures found in home theaters. - DIY and OEM loudspeaker construction - more inert cabinets with damping factors up to 20x higher than raw MDF Specifications: Active Content: 68% +/-5% Working Time: >30 minutes* Cure Time: 7 days Viscosity: Light Paste (65,000 cps) Odor: Mild (Temporary) VOC: Flash Point: >200 deg F Application Temp: 40-90 deg F Damping Factor: Typically 0.50+ with 2*5/8 fire code drywall (3X higher than any competitive product we are aware of) Coverage: Approx. 16 sq ft per tube at full coverage Intallasjonsguide fra produsent: https://www.greengluecompany.com/Installation
Les merInformasjon fra produsent: One of the biggest noise complaints is the sound of footsteps and squeaky floors. The squeaking occurs naturally when floors settle, and joists rub together with subflooring – but this is avoidable. The solution is Green Glue Noiseproofing Joist Tape. The tape creates a seal that prevents void spaces which occur as joists and subfloors dry and shrink. Rolling Green Glue Noiseproofing Joist Tape takes practically no time at all and can easily be incorporated into flooring jobs with our patented roller. Simply roll tape onto floor joists, adhesive side down, and install subflooring on top. Green Glue Noiseproofing Joist Tape comes in three standard width sizes based on the most common joist sizes in new construction projects. Joist Tape The Green Glue Noiseproofing Joist Tape is 100 linear feet long and available in widths of 1-7/16", 2-1/4", and 3". Select the width appropriate for your floor joists. The Joist Tape must cover the width of the joists to be effective. Make sure all surfaces are free from dirt, ice, and water before applying the Noiseproofing Joist Tape. Apply the Noiseproofing Joist Tape — adhesive side down — evenly to the top of each floor joist. This can be done by hand or using the Green Glue Joist Tape Applicator, pictured right. Once placement of the Noiseproofing Joist Tape is complete, apply the sub-floor as normal to joists after being affixed. Please note The use of construction adhesive is NOT possible when securing the subfloor. Joist Tape should be at least 50°F when applied for the adhesive to ensure the pressure sensitive adhesive will function. Joist Tape is used to address squeaks when the subfloor rubs against the joists and does not provide other acoustical benefits. Visit www.greengluecompany.com/FAQs for further information.
Les merKraftig pugepistol fra Sika som egner seg for påføring av kraftig lim som Casco XtremFix. Beskrivelse 310 ml patron Kraftoverføring 12:1 Fugepistol Powerflow prof 310 ml Fugepistol Powerflow prof fra Cox i England er en brukervennlig og solid fugepistol med dreibar skål. Fugepistolen er konstruert slik at kraften du får på stempelet er hele 250 kg. Dette gjør fugepistolen godt egnet til tyngre masser som lim o.l Fugepistolen er passe kraftig til å kunne brukes på det meste, uten at det oppleves som at stempelet går tregt. Pistolen har også en returmekanisme, som aktiveres ved å skyve på plastklossen som står på stempellåsen, den trekker da stempelet litt tilbake når man slipper ut håndtaket. Dette gjør at fugemassen ikke fortsetter å tyte ut når man ikke trykker på håndtaket. Er ikke returmekanismen aktivert blir stempelet stående i spenn mellom hvert pump, og det kommer ut fugemasse/lim også mellom hvert pumpetak. Dette er en fordel om du skal ha en løpende fuge. Fugepistolen passer for gjør-det-selv brukere og profesjonelle. Fugepistolen har høy presisjon og avmerkede smørepunkter for lang levetid og funksjonalitet.
Les merBig Frame up to cm 1000 Reliability and efficiency. Conceived for large-sized projections also outdoors, it is bending and torsion-proof. The fabric with steel eyelets all around its perimeter fixes to a number of sliding bolts positioned in a groove at the back of the aluminium frame. A functional parallel-track system on the frame allows adjusting the fabric in case of expansion due to thermal excursion. The junctions/joints of the segments on the corners and at the centre of the long sides are in zinc-coated steel. When the length of the base is over 6 metres the screen is equipped with a rear vertical bar with adjustable straps to keep the proper asset.Assembling the segments and the fabric is simple and intuitive. The screen comes with a wall mounting kit with four brackets.
Les merKraftig Step-Down konverter som lar deg bruke alle dine amerikanske produkter i Norge! Konverteren benytter standard 220V-nett og konverterer dette til 110V. ST4000 leveres med fire jordede 110V (US) utganger. Totaleffekt er 4000W, men vi anbefaler at en holder seg innenfor 80% av omformerens kapasitet for å unngå høy varmeutvikling. Omformeren benytter en sikring som enkelt lar seg skifte ut ved eventuell overbelastning. Produket er CE-godkjent og holder en meget høy kvalitetsgrad. Se under "support info / nedlastnings"-fanen for CE-dokument. Størrelse / vekt (ca.) ST500: 10x10x15cm (H/B/D) - 4KG ST1000: 20x20x30cm (H/B/D) - 10KG ST1500: 20x20x30cm (H/B/D) - 11KG ST2000: 20x20x30cm (H/B/D) - 12KG ST3000:22x25x35cm (H/B/D) - 13KG ST4000: 22x25x35cm (H/B/D) - 15KG
Les merBy rigidly coupling a loudspeaker enclosure to a floor by means of a "spiking" system, it is possible to dramatically improve clarity, stereo imaging and bass response. This is very apparent with subwoofer systems. These attractive spikes are precision machined from solid brass and then plated with a durable black finish. Each cone spike weighs 86 grams and measures 1-1/4" diameter and 1-1/2" tall. The two piece threaded tip design allows for precise level adjustment. T-nuts and threaded studs are included for mounting in cabinets with walls up to 1" thick. Set includes 4 black cone spikes, 4 black floor discs, 4 T-nuts and 4 threaded studs. Threads are M6.
Les merVicFrame er et enkelt system for montering av paneler produsert i skum. Støttede paneler inkluderer bl.a.: VICOUSTIC CINEMA ROUND PREMIUM Lightweighted fixation frame developed to hang 4 acoustic panels on the wall. It is easy to mount and it allows the exchange of panels from the frame, which can be used with panels made out of VicPet Wool, M1 and EPS. Main Info Dimensions: 1000 x 1000 x 21mm / 39.4'' x 39.4'' x 0.8''
Les merNYHET! AutoCalc lar deg automatisk beregne ditt materialbehov for en komplett lydisolasjon av ditt rom >> No soundproofing job is complete without Green Glue Noiseproofing Sealant. Cracks between walls, ceilings, and floors compromise the sound isolation of any room by allowing noise to penetrate into adjoining rooms. Simply adding Green Glue Noiseproofing Sealant to your soundproofing project can reduce noise transmission by 100 times or more. Green Glue Noiseproofing Sealant can be applied as easily as any standard calking material. It fits into a quart-sized calking gun and is applied along the edges and joints between floors and walls and ceilings and walls for maximum performance. Green Glue Noiseproofing Sealant can also be painted once dry. Green Glue Noiseproofing Sealant exceeds LEED green building requirements, is low V.O.C., and is low odor. It can be easily cleaned while still wet with soap and water.
Les merDenne flockede velouren egner seg godt for både festing på vegg som dekorasjon, eller til et sceneteppe. Velouren er pålimt et lag vevet stoff, og har derfor også litt strekk. Til innfesting på vegg anbefaler vi bruk av våre festelister samt spesialverktøy for montering. Velouren er matt, og fremstår som helt sort når lyset slås av.
Les merDenne spesialkanalen er tilpasset Philips Hue LED-strips som er noe bredere enn standard (ca. 15mm vs. 12,5mm for standard LED-strips). Kanalen leveres i eloksert aluminium (silver), og har også hvit diffusor. Det er mange måter å installere en slik LED-strip på, enten bak absorbenter for mer indirekte lys, mellom for et mer direkte lys eller falset inn i en kanal. Diodene på Philips HUE sine LED-strips har relativt stor avstand, så monterer du de med direkte belysning vil du se diodene via diffusoren. Dette er slik vi har valgt å montere disse i vår nye referansekino og synes det ser veldig bra ut: Diodene på Philips Hue Lightstrips ligger med avstand tilsvarende det øverste eksempelet Det medfølger clips for montering på vegg samt ett sett start- og endelokk for hver kanal á 2m. Denne kanalen har følgende mål:
Les merElegant, touchbasert RF fjernkontroll for veggmontering. Passer MK-428RGBT, MK-630RGBT og MK-790RGBWT stjernehimlinger. Kobles opp med standard 220v på baksiden, men har trådløs overføring via RF til stjernehimling-enginen (lyskilden). @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-133234-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-133234 .so-panel { margin-bottom:30px } #pl-133234 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-133234-0.panel-no-style, #pg-133234-0.panel-has-style > .panel-row-style { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-133234-0 > .panel-grid-cell , #pg-133234-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pg-133234-0 { margin-bottom:px } #pl-133234 .panel-grid-cell { padding:0 } #pl-133234 .panel-grid .panel-grid-cell-empty { display:none } #pl-133234 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }
Les merISO Blanket and ISO Blanket Pro are limp-mass solutions designed for the treatment of airborne noise. They differ in their STC (Sound Transmission Coefficient) in that ISO Blanket Pro has a bigger coefficient/performance due to its agglomerated fabrics. The blankets perform as sound barriers when applied to ceilings, walls, and floors. Their flexibility, thin design, and high resistance make them easy-to-use materials. They are most effective when used in construction projects that involve several layers of different materials. Density of 4,5kg/m2 in the Pro Version and 6.5kg/m2 in the Standard Version, ensures a high level of isolation by diminishing the sound emitted from joins between the floor and the rest of the construction. Available Products 1) Iso Blanket 2) Iso Blanket Pro, Mer info >>
Les merKraftig Step-Down konverter som lar deg bruke alle dine amerikanske produkter i Norge! Konverteren benytter standard 220V-nett og konverterer dette til 110V. ST2000 leveres med fire jordede 110V (US) utganger. Totaleffekt er 2000W, men vi anbefaler at en holder seg innenfor 80% av omformerens kapasitet for å unngå høy varmeutvikling. Omformeren benytter en sikring som enkelt lar seg skifte ut ved eventuell overbelastning. Produket er CE-godkjent og holder en meget høy kvalitetsgrad. Se under "support info / nedlastnings"-fanen for CE-dokument. Størrelse / vekt (ca.) ST500: 10x10x15cm (H/B/D) - 4KG ST1000: 20x20x30cm (H/B/D) - 10KG ST1500: 20x20x30cm (H/B/D) - 11KG ST2000: 20x20x30cm (H/B/D) - 12KG ST3000:22x25x35cm (H/B/D) - 13KG ST4000: 22x25x35cm (H/B/D) - 15KG
Les merDenne flockede velouren egner seg godt for både festing på vegg som dekorasjon, eller til et sceneteppe. Velouren er pålimt et lag vevet stoff, og har derfor også litt strekk. Til innfesting på vegg anbefaler vi bruk av våre festelister samt spesialverktøy for montering. Velouren er matt.
Les mer1000stk spesialskruer for innfesting av Fermacell fibergips til enten tre- eller stålstendre. 3,9x30mm brukes til både første og bakenforliggende lag der lag 2 ikke trenger å hefte i stenderverket ettersom platen har tilstrekkelig bæring direkte i skruen. Forbruk er ca. 13 skruer pr. kvm til vegg og ca. 30 skruer pr. kvm til tak.
Les merFashion Base from 122cm up to 400cm. The inward rounded borders can be painted matt black or even come with black velvet finish in order to absorb any possible overlapping of the projected image. The perimeter groove and the accessories provided make it possible to fix the screen to the wall or to let it hang from the ceiling. The fabrics are trimmed with a PVC border which disappears behind the frame giving the surface a remarkable flatness. SCREEN CHARACTERISTICS: • stylish rounded borders • velvety frame on request • wide range of fabrics with black PVC border • T-stands for floor application on request • customized sizes Download standard formats and sizes (.pdf) Technical drawing_ sample (.pdf) instruction_fashion (.pdf) Brochure_Fashion (.pdf)
Les merNYHET! GIKs patentsøkte "Flexrange"-teknologi (Range Limiter) løser langt på vei en av de mest utfordrende problemene knyttet til absorbsjon; overdemping! GIK legger inn en film som rett og slett reflekterer høyfrekvente bølger, mens de lengre mellomtone- og bassbølgene får passere. Som du ser lenger ned på siden er resultatet langt mindre demping i diskantområdet. Dette prinsippet er sterkt anbefalt om du skal dempe bassrefleksjon rundt og i nærheten av lytteposisjon. 244 BASS TRAP FEATURES: patent pending FlexRange Technology options LEVERES MED: FULL RANGE (dvs. uten filter) professionally constructed two-frame system and built-in air gap easy wall and corner installation using wire integrated in the back like a picture frame 118mm thick and available in three different sizes: 600mm x 1200mm, 600mm x 600mm, and 300mm x 1200mm. weight: FULL RANGE = 5.6 kg RANGE LIMITER = 7.6 kg optional built-in Scatter Plate for an even balance of absorption, diffusion, and scattering free standing options available with wooden or metal stands or boom stand brackets (boom stand not included) easy to install on ceiling with optional Cloud Mounting Bracket can be custom sized to fit your specifications available in our 9 standard, quality GIK Acoustics fabric options additional Camira Cara or Camira Lucia fabric choices available employs ECOSE® technology absorption material. The GIK Acoustics 244 Bass Trap with FlexRange Technology utilizes our patent pending design to maximize low end control. Simulated sound waves strike the FRT Membrane When combined with our proprietary RANGE LIMITER membrane system, the 244 Bass Trap with FlexRange Technology absorbs up to 50% more low end (below 60Hz) and retains 75% more high end (from 400Hz and above) versus the broadband FULL RANGE option. Compared to other commercially available products which are simple, fabric-wrapped, DIY-type panels, the 244 Bass Trap with FlexRange Technology is precision engineered and manufactured to exacting standards. We begin with a two-frame system that allows low end to be absorbed from the sides and back while the professionally constructed frame maintains a crisp, sharp edge. GIK Acoustics uses high-quality fabrics as our standard options as opposed to cheap burlap or microsuede. The 244 Bass Trap with FlexRange Technology hangs truly flush on the wall using an integrated wire on the back and can easily be mounted straddling corners (recommended) or as a cloud on the ceiling. The design of the 244 Bass Trap with FlexRange Technology allows it to be used in multiple quantities to absorb as much bass as possible without over absorbing the high end, which leaves life inside the room. Cymbals are crisp and clear while bass kicks! Mer om Flexrange: FlexRange Technology is GIK Acoustics’ unique, patent pending system for providing the best in bass trapping and low end absorption. Backed by research, development and testing, FlexRange Technology encompasses our...
Les merAuralex D36-DST et et komplett kit tilpasset et mindre studio eller hjemmekinorom. Panelene er små og enkle å plassere, og det medfølger også lim for montering på vegg / tak. SKU: D36CHA UPC: 818105004423 DST112 NRC: 0.60 DST114 NRC: 0.65 FIRE RATING: UL 94 HF-1 Description The D36-DST™ Roominator™ Kit offers you a starting point to reduce unwanted slap and flutter echo in your room. Think of all the creative possibilities these kits afford you as you begin to tune your room. Perfect for vocal booths, isolation rooms, or small spaces with dimensions of approximately 6′ x 8′ x 8′. Includes: (18) Charcoal DST-112s™ – 30x30cm – mer info >> (18) DST 114s™ – 30x30cm – mer info >> Mounting Adhesive Included Roominator™ Kits Spec Sheet Videos
Les merMultifuser DC 2 is a bi-dimensional diffusion panel that is frequently applied to walls or ceilings, providing multi-reflection on both vertical and horizontal planes in sound critical spaces. It performs on mid and high frequencies, brightening and clarifying sound. Made from high quality EPS (Expanded Polystyrene), Multifuser DC 2 is notable not only for its effective performance in solving problems like lack of speech intelligibility or music definition, but also for its attractive design that fits perfectly in any kind of room. High efficiency 2 dimensional Primitive Root Diffuser + Top surface angle. Easy to install Available in 3 different colours Can be painted with water-based paints Applications Recording and Broadcast Studios, Post Production Studios, Listening Rooms, Conference and Teleconference Rooms, Lecture Halls, Distance Learning Rooms, Public Spaces, Auditoriums, Performance Spaces, etc. Main Info Ref: B00003 (Black) , B00004 (White) , B00005 (Grey) EAN13: 5600301843082 HS-Code: 39203000 Dimensions: 595 x 595 x 147 mm Scratch Resistance: No Washable: No Performance Functionality: Diffusion Absorption Frequency: High Frequencies alpha with Shape Indicators: 0.25 NRC: 0.250 Fire Class European (EN): Euroclass F Shipping Units Per Box: 6 (NB! Pris er angitt pr. stk, med rabatt på hele esker) Box Dimensions: 710 x 615 x 615 mm Box Weight: 10.2 kg Box Volume: 0.269 m3 Raw Materials Material: Polystyrene Polystyrene Density: 60.0 Design Polystyrene Color: Black // White // Grey Edges: Angled Installation Place: Wall Fixing Type: Glued *The images used are illustrative, not fully corresponding to the actual color of the products.
Les merNYHET! Ny versjon med ringkjerne / toroidal trafo. Ringkjerne transformatoren genererer mindre støy og har vesentlig lavere vekt enn en tradisjonell transformator, se sammenligning av vekt i tabellen nedenfor. Kraftig Step-Down konverter som lar deg bruke alle dine amerikanske produkter i Norge! Konverteren benytter standard 220V-nett og konverterer dette til 110V. ST4000 leveres med fire jordede 110V (US) utganger. Totaleffekt er 4000W, men vi anbefaler at en holder seg innenfor 80% av omformerens kapasitet for å unngå høy varmeutvikling. Ettersom denne omformeren trekker noe mer enn 16A på max vil den kunne ta noen sikringer når den slås på da den trekker full effekt ved oppstart, og i slike tilfeller må sikringen slås på igjen relativt raskt for at omformeren ikke skal ta sikringen igjen. Totalbelastningen på enheten bør ligge under 80% / 3200W for å unngå at sikringen går igjen. Omformeren benytter en sikring som enkelt lar seg skifte ut ved eventuell overbelastning. Produket er CE-godkjent og holder en meget høy kvalitetsgrad. Se under "support info / nedlastnings"-fanen for CE-dokument. Størrelse / vekt MODELL VEKT TRADISJONELL MODELL VEKT RINGKJERNE MODELL ST500 / ST500T (10x10x15cm) 3,33kg 2,25kg / 32% lavere vekt ST1000 / ST1000T (20x20x30cm) 8kg 4,5kg / 44% lavere vekt ST2000 / ST2000T (20x30x30cm) 12kg 6kg / 50% lavere vekt ST3000 / ST3000T (22x25x35cm) 14kg 7kg / 50% lavere vekt ST4000 / ST4000T (22x25x35cm) 16kg 11kg / 31% lavere vekt
Les merKingpins Velvet Framed benyttes med data og hjemmekinprojektorer, i møterommet eller i hjemmet. Et rammespent lerret utviklet for optimal bildegjengivelse. Rammen er dekt med semsket stoff som forhindrer eventuelle forstyrrende lysrefleksjoner. Duken har gode og naturlige farge- og lysegenskaper. Et garantert bølgefritt lerret.
Les merLAST NED VÅR WHITEPAPER (=TEKNISK DOKUMENTASJON INKLUDERT SERTIFIKATER OG INNFØRING I METODE OG BEGREPER) FOR LYDISOLASJON UTFORMET AV VÅR IN-HOUSE SIVILINGENIØR INNEN BYGG, EIVIND LYGREN, HER >> Eivind Lygren, siv. ing. bygg NYHET! AutoCalc lar deg automatisk beregne ditt materialbehov for en komplett lydisolasjon av ditt rom >> NYHET! Spesialproduserte U-boats for norske stenderdimensjon er endelig tilgjengelig fra DreamScreen! Bredde på 49mm gir mulighet for bruk av både 48x48mm, eventuelt 48x36mm gulvstendre. Du kan også bruke 48x30mm, men da må gulvplatene være tilstrekkelig stive for å tolerere dette og man må tenke på hvilken vekt som senere skal belaste gulvet. Pris er angitt pr. stk, men du får rabatt ved kjøp av 100stk eller flere. Denne nye v2-versjonen benytter silica gel i stedet for gummi, et materiale som er enda mykere og dermed har enda bedre egenskaper med tanke på lydisolasjon ettersom enda mer av vibrasjonsenergien fra lydbølgene avvikles i U-boaten. Beregn 7 stk U-boats per kvm gulv. Informasjon fra produsent If you are looking for the best possible noise-reduction from your cinema-room there is simply no way around decoupling the floor, walls and ceiling. If you decouple, the sound is unable to travel as easily through the construction, reducing ambient noise very effeciently. You need about 7 U-boats per square meter floorspace when using 48x48mm or 48x36mm studs. You can also use even more shallow studs, such as 48x30mm, but in such case we recommend using 15 U-boats per square meter, or every 20cm instead of every 30cm. Installing the U-boats There are lot of alternative methods on decoupling your floor. Rubber U´s, however, has proven very functional both in terms of decoupling-effeciency but also in regards to easy and comprehensible installation. This method is popular in both professional studios and home cinemas. These U-boats allow you to place 48x48mm studs or alternatively 48x36mm studs if you´d like to save some height directly on the sub-floor. You can also use 48x30mm studs, if the floor plates has sufficient strength We recommend to use 30cm between each U-boat and 60 cm center-center distance between each row of U-boats. Further we recommend using 48x48mm or 48x36mm studs. 48x30mm studs could also be used, if the floor plates has sufficient strength. We also recommend using insulation under the floor plates. We strongly recommend to use green glue and an additional layer of fiber gypsum plates to further improve sound insulation efficiency. Please remember to never allow the floorboards to touch the surrounding walls as this would reduce the efficiency of the decoupling significantly. We recommend that you leave about 2-3mm and use GreenGlue Sealant to cover the gap. Dimensions of the clip is 61x38mm (width / height). The inner section is 49mm allowing for some flexibility using a 48mm stud. The bottom rubber section builds 10mm from the sub-flooring.
Les merAuralex Alpha et et komplett kit tilpasset et mellomstort studio ( SKU: ROOMADCHACHA UPC: 818105004683 DST112 NRC: 0.60 DST LENRD NRC: 1.50 FIRE RATING: UL 94 HF-1 DST114 NRC: 0.65 Description The Alpha-DST™ Roominator™ Kit achieves better sound out of your existing equipment and will get you more enjoyment out of your room! The Alpha-DST™ Kit gives you a multitude of design possibilities, and is available in 3 color combinations. T he Alpha-DST™ Kit is designed primarily for rooms with a floor square footage of less than 100 ft/sq. The shortest room dimension should be about 6 to 8 feet. Includes: (32) Charcoal DST-112s™ - 30x30cm - mer info >> (32) DST 114s™ - 30x30cm - mer info >> (4) DST-LENRD™ Bass Traps - 30x30cm - mer info >> Mounting Adhesive Included California residents see Prop 65 WARNINGS Roominator™ Kits Spec Sheet Videos https://youtu.be/I3q5kQjMAbc
Les mer250stk spesialskruer for innfesting av Fermacell fibergips til enten tre- eller stålstendre. 3,9x30mm brukes til både første og bakenforliggende lag der lag 2 ikke trenger å hefte i stenderverket ettersom platen har tilstrekkelig bæring direkte i skruen. Forbruk er ca. 13 skruer pr. kvm til vegg og ca. 30 skruer pr. kvm til tak.
Les merSpesialtilpassede skruer med TORX hode, 32mm lengde og selvborrende spiss, dog anbefaler vi allikevel å forhåndsborre med et 3mm borr. Spesialtilpasset for sammenføyning skjøten på DreamScreens ProSilence stålstendre. Informasjon fra produsent Finding good screws is actually quite hard and since DreamScreen is all about Excelling stuff we figured why not do a custom made screw - perfectly fit our ProSilence lineup? The screw is 32mm in length, and as such you can use it to attach plastboards to our ProSilence Clips-system for both first and second layer. The head is TORX, allowing the bit to stick far better than is the case for regular phillips heads. The tip is self drilling, perfectly suited for penetrating the ProSilence steel studs.
Les merKraftig bassfelle med hele 1,2m høyde og bredde på 58,5cm (i front). Leveres i en flott sort "Black" farge (se fargekart nedenfor samt hovedproduktbilde). Denne bassfellen har: FULL RANGE – without a membrane, bass traps are broadband Informasjon fra produsent: Technical Specs Tri-Trap Corner Bass Trap Features Designed to fit in any corner Standard Caps Available: Blonde wood veneer, black rigid vinyl, white rigid vinyl Upgrade Caps Availalbe: Mahogany veneer, Gray Elm veneer (+$15 per unit) Standard size: 23.5” front face x 16.5″ x 16.5″ sides x 47” tall Weight: 15 pounds Can be custom sized to fit your specifications RANGE LIMITER options FULL RANGE – without a membrane, bass traps are broadband RANGE LIMITER – with a membrane, bass traps absorb even lower frequencies while the membrane has less effect absorbing upper frequencies Optional built-in Scatter Plate for an even balance of absorption, diffusion, and scattering Class A fire rated – Click HERE for Fire Rating test results Available in 9 standard GIK Acoustics fabric colors Additional Guilford of Maine fabric choices available employs ECOSE® technology absorption material Many studios, home theaters and listening rooms make do with foam wedges in corners which are unattractive and far less efficient in sound wave absorption than acoustic panels. Our dedicated sound engineers have developed a more attractive and effective product – the GIK Acoustics TRI-TRAP Corner Bass Trap © . The Tri-Trap © is one of our most effective bass traps and takes up far less floor space. Constructed with a solid core, the Tri-Trap © is a 47″ tall, freestanding triangular prism able to hold up to 50 pounds in weight. The Tri-Trap©’s clean, professional design means it does not have to be mounted to the wall or corners and is stackable for floor-to-ceiling coverage. The Tri-Trap ©, like all GIK Acoustics bass traps, was lab tested at the prestigious Riverbank Acoustical Laboratory and showed to have true effects at 50Hz and below. The Tri-Trap © has been effectively designed to absorb more low end, but also does an excellent job of absorbing the high end, creating smooth sound absorption from 50 Hz to 5000 Hz. Installing our Tri-Traps © will result in a beautifully balanced room that will suit even the most critical listener. Click HERE to view the product video. When combined with our proprietary RANGE LIMITER membrane system, the Tri-Trap Corner Bass Trap absorbs up to 50% more low end (below 40Hz) and retains 75% more high end (from 100Hz and above) versus the broadband FULL RANGE option. Click here to view the Tri-Trap Corner Bass Trap datasheet Sun Room Audio mastering studio “The Tri-Trap ©s really do the job. It was a pleasure working with the GIK Acoustics crew . It is clear you guys are in it for the music. Thanks again for helping out on the design and steering me in the right direction. The doors here are open anytime you are passing through. Thanks again.” Jon Pousette-Dart Little Big Deal...
Les merKraftig Step-Down konverter som lar deg bruke alle dine amerikanske produkter i Norge! Konverteren benytter standard 220V-nett og konverterer dette til 110V. ST1000 leveres med fire jordede 110V (US) utganger. Totaleffekt er 1000W, men vi anbefaler at en holder seg innenfor 80% av omformerens kapasitet for å unngå høy varmeutvikling. Omformeren benytter en sikring som enkelt lar seg skifte ut ved eventuell overbelastning. Produket er CE-godkjent og holder en meget høy kvalitetsgrad. Se under "support info / nedlastnings"-fanen for CE-dokument. Størrelse / vekt (ca.) ST500: 10x10x15cm (H/B/D) - 4KG ST1000: 20x20x30cm (H/B/D) - 10KG ST1500: 20x20x30cm (H/B/D) - 11KG ST2000: 20x20x30cm (H/B/D) - 12KG ST3000:22x25x35cm (H/B/D) - 13KG ST4000: 22x25x35cm (H/B/D) - 15KG
Les merNB! Ved kjøp av løpemeter må du også legge til et kapptillegg på kr. 249-. Dette finner du under "tilbehør". Moltonstoff benyttes på teaterscener, kinoer, studioer og andre steder der høye krav til stoffets kvalitet stilles. Dette stoffet er også populært å bruke i avanserte hjemmekinoer. Stoffet er nærmest lystett, og har i tillegg en lyddempende funksjon. Info fra produsenten: During the 50 years that Gerriets has been in business, we have developed numerous specialty design materials for the Performing Arts Industry. Because our customers are from theatre, opera, ballet, television, film, touring shows, museums, exhibitors, scenic studios, casinos, and so on, the challenges we have been asked to solve have given us a remarkable technical expertise. Scenemolton type Duvetyn R55 er et kantsydd moltonstoff av god børstet kvalitetsbomull, brannimpregnert i henhold til DIN 4102 og klassifisert under B1 som tungt antennelig materiale. Tykkelsen på 300g/m2 gjør stoffet lystett og gir lyddempende effekt. Farge: grå, bredde = 300 cm. Produktpresentasjon finner du HER >> .
Les merDenne flockede velouren egner seg godt for både festing på vegg som dekorasjon, eller til et sceneteppe. Velouren er pålimt et lag vevet stoff, og har derfor også litt strekk. Til innfesting på vegg anbefaler vi bruk av våre festelister samt spesialverktøy for montering. Velouren er matt.
Les merLAST NED VÅR WHITEPAPER (=TEKNISK DOKUMENTASJON INKLUDERT SERTIFIKATER OG INNFØRING I METODE OG BEGREPER) FOR LYDISOLASJON UTFORMET AV VÅR IN-HOUSE SIVILINGENIØR INNEN BYGG, EIVIND LYGREN, HER >> Eivind Lygren, siv. ing. bygg NYHET! AutoCalc lar deg automatisk beregne ditt materialbehov for en komplett lydisolasjon av ditt rom >> NYHET! Spesialproduserte U-boats for norske stenderdimensjon er endelig tilgjengelig fra DreamScreen! Bredde på 49mm gir mulighet for bruk av både 48x48mm, eventuelt 48x36mm gulvstendre. Du kan også bruke 48x30mm, men da bør U-boatene plasseres enda tettere, type hver 20. cm i stedet for hver 30. cm. Pris er angitt pr. stk, men du får rabatt ved kjøp av 100stk eller flere. Beregn 10stk U-boats per kvm gulv for 48x48 og 48x36 stendre eller 15stk U-boats per kvm gulv for 48x30 lekter. Informasjon fra produsent If you are looking for the best possible noise-reduction from your cinema-room there is simply no way around decoupling the floor, walls and ceiling. If you decouple, the sound is unable to travel as easily through the construction, reducing ambient noise very effeciently. You need about 10 U-boats per square meter floorspace when using 48x48mm or 48x36mm studs. You can also use even more shallow studs, such as 48x30mm, but in such case we recommend using 15 U-boats per square meter, or every 20cm instead of every 30cm. Installing the U-boats There are lot of alternative methods on decoupling your floor. Rubber U´s, however, has proven very functional both in terms of decoupling-effeciency but also in regards to easy and comprehensible installation. This method is popular in both professional studios and home cinemas. These U-boats allow you to place 48x48mm studs or alternatively 48x36mm studs if you´d like to save some height directly on the sub-floor. You can also use 48x30mm studs, but in such case we recommend increasing the number of U-boats from 1 per 30cm to 1 per 20cm. There should be a maximum of 30cm between each U-boat and also maximum 30cm between each row of U-boats using 48x48mm or 48x36mm studs. If you use 48x30mm studs we recommend using one U-boat every 20cm. Every two meter or so, we recommend connecting the rows using a short stud. You only need to place U-boats on every second connecting stud. We also recommend using some form of insulation, and last you screw plus glue the floorboards to the studs, either in one or two layers. Please remember to never allow the floorboards to touch the surrounding walls as this would reduce the effeciency of the decoupling significantly. We recommend that you leave about 2-3mm and GreenGlue Sealant to cover the gap. Dimensions of the clip is 61x38mm (width / height). The inner section is 49mm allowing for some flexibility using a 48mm stud. The bottom rubber section builds 10mm from the sub-flooring.
Les merElevate your space with the SlatFusor 2S from GIK Acoustics, where premium finishes, exceptional acoustic design, and unmatched versatility converge to blend timeless elegance with the acoustic performance only GIK Acoustics can offer. • Available in 2 sizes: Rectangle (600mm x 1200mm) and Square (600mm x 600mm) • Total thickness: 70mm – effectively absorbs down to 150Hz • Scatters mid & high frequency reflections • Reduces noise, echoes & reverb without over-dampening • Combining wood slats on black felt with 50mm GIK Acoustics absorber • 30% more effective than a standard 50mm absorbers • Premium finish: furniture-grade, stainable Oak Veneer • Seamless covering of the entire wall or use as individual panels • Mounted with sawtooth hangers (included). No glue or adhesive needed. The Acoustic Wood Wall Panel Finding the right balance between high and low frequencies is one of the toughest challenges in any space. This is where the SlatFusor 2S shines, a wood wall panel effortlessly combining acoustic performance with elegant design. The SlatFusor 2S offers both a timeless design, as well as the exceptional performance that GIK Acoustics panels are known for. The wooden slats scatter high-frequency sound waves, preserving your room’s brilliance. Behind these slats, a high-performance absorber steps in to control resonances in the low and mid-frequency ranges. Performance You Can Trust With an impressive 30% increase in effectiveness below 1000 Hz compared to conventional 50mm thick panels, the SlatFusor 2S redefines the control of echoes, reverberations and resonances. It is the ultimate choice for those seeking both the aesthetics of natural wood and unparalleled acoustic performance in their environment. Masterful Craftsmanship Wood Wall Panel In Real Oak Veneer A fusion of craftsmanship and exceptional acoustic design, the SlatFusor 2S comes in a premium, furniture-grade finish. While the SlatFusor 2S exudes natural beauty with its natural oak veneer, the ability to stain the slats opens up endless possibilities. A statement of sophistication that seamlessly complements any environment, whether you’re at home or in a professional studio. Seamless Surfaces Timeless Design The pioneering design of the SlatFusor 2S wood wall panel ensures that each individual slat panel can be effortlessly arranged on your wall, leaving no unseemly gaps. This meticulous attention to detail not only elevates the acoustic performance of your space but also enhances its visual appeal. A harmonious blend of form and function makes the SlatFusor 2S your perfect choice for acoustic wall paneling. Core Mineral wool provides twice the low-end absorption over similar foam-based products. Design Stainable oak veneer slats on a 50mm thick acoustic panel frame filled with eco-friendly, high-performance sound absorbing material, wrapped in black fabric. Weight Square = 5kg Rectangle = 9kg NRC Classification: A Material GREENSAFE technology absorption material Quality...
Les merInkluderer 2m VicFix J profile for montering av flere akustikkprodukter på rad på en svært praktisk og effektiv måte. Lar deg også montere J profile paneler i himlingen uten lim, samt gjør det mulig å enkelt bytte type akustikkpanel fra f.eks. en diffusor til en absorbent ved å slide panelet av / på. Støttede paneler inkluderer bl.a.: VICOUSTIC STUDIO LINE DC3 DIFFUSOR VICOUSTIC CINEMA ROUND ULTRA FUSER VICOUSTIC VICPATTERN ULTRA WAVEWOOD VICOUSTIC CINEMA FORTE / PIANO / FORTISSIMO VIKTIGE TIPS! Vi anbefaler bruk av Vicoustic sin "gauge" som enkelt hjelper deg å finne avstanden mellom hver j profile brakett (se installasjonsveiledning). Se under tilbehør. Husk at du trenger 2 skinner per rad med akustikkpaneler samt at du trenger >60cm avstand fra sideveggen for å kunne slide inn panelene. Made of aluminium the VicFix J Profile is sturdy, but easy to fix on the wall and ceiling. This new accessory simplifies the process of installation of the acoustic panels, making it fast and effective. It also allows the user to interchange absorption and diffusion panels according to his desires or room acoustic objectives, by simply sliding the panels. Main Info Dimensions: 10 x 20 x 2000mm / 0.4'' x 0.8'' x 78.7''
Les merNYHET! S30 i 50dB utførelse er Dalocs toppserie innen lyddører. Dette er døren for deg som stiller store krav til lydisolasjon, der lyddøren ofte kan bli det svake punktet. Daloc er en profesjonell produsent av dører som leverer dører i øverste kvalitetsklasse. Dørene brukes ofte i offentlige bygg, men egner seg vel så godt i en hi-end hjemmekino. Det eneste som demper mer enn disse er en dobbeltdør (tandemdør) av samme type, som også kan leveres på henvendelse. Selv med dobbeltdør øker imidlertid isolasjonsverdien kun med 3dB (fra 50->53dB) hvilket betyr at denne løsningen er svært godt lydisolert selv med en enkelt dør. Dette er en lagerført, leveringsklar dør som må hentes på lageret, men den kan også produseres på andre spesialmål og leveres deg direkte på 3-6 uker. Ta kontakt for pristilbud! Produktblad >> Standard inkludert i leveransen: Karmtype 41 (stål, sort: NCS S9000-N ): Fast gerikt på hengslesiden. Karmen innmonteres ved hjelp av de justerbare karmhylsene. Karmhylsene justeres med umbraconøkkel (12 mm). Karmen skal dyttes med isolasjon eller tilsvarende (følger ikke med) og deretter tettes med fugemasse for å oppnå den aktuelle brann-, lyd- og røyktetthetsklassen. For å oppnå riktig funksjon og oppfylle kravene som stilles, er det svært viktig at dørene monteres riktig og med riktige skruer. Vi anbefaler følgende: I betongvegger, murvegger og trestendervegger brukes betongskrue Fischer FFS 7,5x72 (art 521547) med eller uten nylonplugg 10x50, og i stålstendervegger brukes skruen Würth Zebra pias 6,3 x 38 (art 0205 63 38). Disse inngår i våre komplette monteringssett, som medleveres på bestilling. Terskel (stål) Låskasse Assa 310. 1. Størrelse 90x210 2. Hengsling Venstrehengslet, dvs. at døren har hengslene på venstre side når du drar den mot deg. 3. Karm Veggtykkelse / karm 100mm 4. Dørblad (selve døren) Sortmalt (Fargekode: NCS S9000-N) 5. Låskasse Assa 310 Dørhandtak og vrider medfølger ikke, vi foreslår f.eks. Yale sin elektroniske låser som kjøpes hos standard byggvare
Les merDet følger ikke med monteringsboks/brakett, så disse må skrus rett på vegg. Put the finishing touch on home theatre and audio/video installations with these high quality architectural audio wall plates. Unique two piece design utilizes our elegant installer friendly Most common Decora® inserts and wall plates. All of our connectors incorporate a hex lock indent to eliminate connector "spin" and are gold plated for maximum conductivity and long life. All jacks are color coded for polarity identification and are isolated from the plate. Assembly required.
Les merFashion Base from 122cm up to 400cm. The inward rounded borders can be painted matt black or even come with black velvet finish in order to absorb any possible overlapping of the projected image. The perimeter groove and the accessories provided make it possible to fix the screen to the wall or to let it hang from the ceiling. The fabrics are trimmed with a PVC border which disappears behind the frame giving the surface a remarkable flatness. SCREEN CHARACTERISTICS: • stylish rounded borders • velvety frame on request • wide range of fabrics with black PVC border • T-stands for floor application on request • customized sizes Download standard formats and sizes (.pdf) Technical drawing_ sample (.pdf) instruction_fashion (.pdf) Brochure_Fashion (.pdf)
Les merVicFix Metallic lar deg enkelt montere alle paneler med skumgummi bakside uten bruk av lim. Dette inkluderer bl.a. VICOUSTIC CINEMA ROUND PREMIUM Easy and fast to install, you just need to screw the VicFix Metallic into the wall, and hang the acoustic panels. Perfect for VicPET Wool and M1 Foam products. Main Info Dimensions: 76 x 51 x 10mm / 3'' x 2'' x 0.4''
Les merRubber Strip The Rubber Strip is a complementary acoustic product mainly designed for isolating joints around windows and doors. It’s the ideal solution for construction projects, assuring effective isolation against airborne and structural noise. Product Technical Information Material: EPDM Fire Rating: ISO 375; FMVSS302 Colour: Dark Grey Installation: Auto-Adhesive Applications Doors and Windows in: Recording Studios, Broadcast Studios, Post Production Studios, Listening Rooms, Conference and Teleconference Rooms, Lecture Halls, Distance Learning Rooms, etc. More info available to download: 1. Rubber Strip Inf. PDF
Les merFermacell Greenline lim er et tynt lim som er utviklet med hensyn til å skape en sterk skjøt mellom rettkantede fibergipsplater. Fermacell Greenline lim påføres midt på kanten av platen man har montert på veggen. Det skal påføres tilstrekkelig mengde lim slik at hele platekanten får kontakt med limet ved montering av neste plate. Hvorfor velge Fermacell® Greenline lim: Høy fyllingsgrad Enkel bearbeiding: lim og fuging i ett Høy strekkfasthet Lave utslipp: testet av øko-Institut i Köln
Les merProduct Description Cloud Mounting Brackets It’s recommended to place acoustic panels on the ceiling to reduce floor-to-ceiling slap echo, control height modes and eliminate early reflections. But mounting 242 Acoustic Panels, 244 Bass Traps or Monster Bass Traps overhead can be tricky. We’ve taken the difficulty out of the equation with our Cloud Mounting Brackets . Click here to view our video on First Reflection Points . Features: Securely hung in minutes with 2 toggle bolts Hangs perfectly flat Professional and neutral finish Provides a 4″ air gap to absorb lower frequencies Able to install on a vaulted ceiling with a 4″ air gap Click here for instructions on how to install a panel using the GIK Acoustics Cloud Mounting Brackets .
Les merNYHET! Ny versjon med ringkjerne / toroidal trafo. Ringkjerne transformatoren genererer mindre støy og har vesentlig lavere vekt enn en tradisjonell transformator, se sammenligning av vekt i tabellen nedenfor. Kraftig Step-Down konverter som lar deg bruke alle dine amerikanske produkter i Norge! Konverteren benytter standard 220V-nett og konverterer dette til 110V. ST3000 leveres med fire jordede 110V (US) utganger. Totaleffekt er 3000W, men vi anbefaler at en holder seg innenfor 80% av omformerens kapasitet for å unngå høy varmeutvikling. Omformeren benytter en sikring som enkelt lar seg skifte ut ved eventuell overbelastning. Produket er CE-godkjent og holder en meget høy kvalitetsgrad. Se under "support info / nedlastnings"-fanen for CE-dokument. Størrelse / vekt MODELL VEKT TRADISJONELL MODELL VEKT RINGKJERNE MODELL ST500 / ST500T (10x10x15cm) 3,33kg 2,25kg / 32% lavere vekt ST1000 / ST1000T (20x20x30cm) 8kg 4,5kg / 44% lavere vekt ST2000 / ST2000T (20x30x30cm) 12kg 6kg / 50% lavere vekt ST3000 / ST3000T (22x25x35cm) 14kg 7kg / 50% lavere vekt ST4000 / ST4000T (22x25x35cm) 16kg 11kg / 31% lavere vekt
Les merKraftig bassfelle med hele 1,2m høyde og bredde på 58,5cm (i front). Leveres i en flott sort "Black" farge (se fargekart nedenfor samt hovedproduktbilde). Dette er versjonen med range limiter integrert, hvilket betyr at felles starter å reflektere på rundt 400Hz som følge av et membran som er installert. Dette gjør at bassfellen kan plasseres nærmere lytteposisjon uten at romklangen forstyrres ettersom en standard bassfelle har mye absorbsjon også oppover i frekvens og dermed risikerer å dempe de høye frekvensene i for stor utstrekning. Informasjon fra produsent: Technical Specs Tri-Trap Corner Bass Trap Features Designed to fit in any corner Standard Caps Available: Blonde wood veneer, black rigid vinyl, white rigid vinyl Upgrade Caps Availalbe: Mahogany veneer, Gray Elm veneer (+$15 per unit) Standard size: 23.5” front face x 16.5″ x 16.5″ sides x 47” tall Weight: 15 pounds Can be custom sized to fit your specifications RANGE LIMITER options FULL RANGE – without a membrane, bass traps are broadband RANGE LIMITER – with a membrane, bass traps absorb even lower frequencies while the membrane has less effect absorbing upper frequencies Optional built-in Scatter Plate for an even balance of absorption, diffusion, and scattering Class A fire rated – Click HERE for Fire Rating test results Available in 9 standard GIK Acoustics fabric colors Additional Guilford of Maine fabric choices available employs ECOSE® technology absorption material Many studios, home theaters and listening rooms make do with foam wedges in corners which are unattractive and far less efficient in sound wave absorption than acoustic panels. Our dedicated sound engineers have developed a more attractive and effective product – the GIK Acoustics TRI-TRAP Corner Bass Trap © . The Tri-Trap © is one of our most effective bass traps and takes up far less floor space. Constructed with a solid core, the Tri-Trap © is a 47″ tall, freestanding triangular prism able to hold up to 50 pounds in weight. The Tri-Trap©’s clean, professional design means it does not have to be mounted to the wall or corners and is stackable for floor-to-ceiling coverage. The Tri-Trap ©, like all GIK Acoustics bass traps, was lab tested at the prestigious Riverbank Acoustical Laboratory and showed to have true effects at 50Hz and below. The Tri-Trap © has been effectively designed to absorb more low end, but also does an excellent job of absorbing the high end, creating smooth sound absorption from 50 Hz to 5000 Hz. Installing our Tri-Traps © will result in a beautifully balanced room that will suit even the most critical listener. Click HERE to view the product video. When combined with our proprietary RANGE LIMITER membrane system, the Tri-Trap Corner Bass Trap absorbs up to 50% more low end (below 40Hz) and retains 75% more high end (from 100Hz and above) versus the broadband FULL RANGE option. Click here to view the Tri-Trap Corner Bass Trap datasheet Sun Room Audio mastering studio “The Tri-Trap ©s...
Les merKraftig LED-basert stjernehimmel med 18W effekt på enginen. Såpass høy effekt gir deg mulighet til å belyse stjernehimmelen langt tydeligere enn kit med lavere effekt. Pakken inneholder svært mange fibre som også bidrar til å øke kvaliteten på effekten. Kittet er meget enkelt å montere, der du driller hull i himlingen på hhv 0,75, 1 og 1,5mm ihht medfølgende antall fibre. Pakken leveres med plug-and-play fiberengine med standard AC-adapter samt RF-basert remote. Kittet er meget enkelt å montere, der du driller hull i himlingen på hhv 0,75, 1 og 1,5mm ihht medfølgende antall fibre. Pakken leveres med plug-and-play fiberengine med standard AC-adapter. Eksempel på installasjon av en fiberoptisk stjernehimling Pakken inkluderer: 18W LED engine (dimensjon: 6x10x15cm H/B/D). Twinkle hjul integrert. 47 fibre pr. m2. RF-basert fjernkontroll lar deg justere av / på samt funkling av / på (de øvrige funksjonene er deaktivert på denne remoten). I tillegg medfølger en 2,4GHz RF touch remote som styrer RGB farger og intensitet. Denne remoten lar deg også styre opp til 4 separate engines (stjernehimling lysmotorer) hvis disse er montert i forskjellige rom. 240stk 0,75mm fibre, 100stk 1mm fibre og 8stk 1,5mm fibre. Fibre i ulik tykkelse gir en mer troverdig stjernehimmel. Fibrene er 4m lange hvilket gjør at du maksimalt kan lage en stjernehimmel på 4x4m med denne pakken. En fiberoptisk himling gir bl.a. økt opplevelse av takhøyde Installasjonen foretas enkelt ved at du driller hull i ønsket mønster og dimensjon (et tilfeldig mønster går raskest og ser ofte best ut). Fiberen stikkes deretter gjennom huller fra oversiden og klippes under. Et tips er å bruke en oppvarmet saks / tang slik at kappene blir renest mulig og dermed lyset får best mulig utgangspunkt. Fibrene limes på oversiden av platen med fleksibelt lim (f.eks silikon-lim) RF-basert fjernkontroll lar deg justere av / på samt funkling av / på (de øvrige funksjonene er deaktivert på denne remoten). I tillegg medfølger en 2,4GHz RF touch remote som styrer RGB farger og intensitet. Denne remoten lar deg også styre opp til 4 separate engines (stjernehimling lysmotorer) hvis disse er montert i forskjellige rom. @import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-5739-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-5739 .so-panel { margin-bottom:30px } #pl-5739 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-5739-0.panel-no-style, #pg-5739-0.panel-has-style > .panel-row-style, #pg-5739-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-5739-0 > .panel-grid-cell , #pg-5739-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pl-5739 .panel-grid-cell { padding:0 } #pl-5739 .panel-grid .panel-grid-cell-empty { display:none } #pl-5739 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }
Les merNB! Kun ramme , den akustisk transparente UltraWeave lerretsduken selges separat. Se også pakketilbud med ramme og rabattert lerretsduk. Informasjon fra produsent USER MANUAL >> Your image is really never better than what the screen is able to reflect! The requirement on the performance of the screen increases as the source becomes available in higher quality and the projectors start rolling out 4K, laser and all other sorts of features. The DreamScreen series of UltraFrames is developed with 4K, HDR and high color accuracy in mind, and effectively combines a surprisingly competitive price with performance even true enthusiasts have come to embrace. As we finally approach mass production of our UltraWeave V6 acoustical transparent screen material we are discontinuing the old non-AT fabrics and rather recommend the UltraWeave V6 on all our frames. Why? Well, the UltraWeave V6 is actually providing a better overall image than even our most advanced PVC-based screens are able to reproduce. When you are able to place your speakers behind the fabric as well, there is really no ample reason to use a non-AT fabric any longer! Your image is really never better than what the screen is able to reflect! The requirement on the performance of the screen increases as the source becomes available in higher quality and the projectors start rolling out 4K, laser and all other sorts of features. The DreamScreen series of UltraFrames as well as our patented UltraWeave sound transparent fabric is developed with 4K, HDR and high color accuracy in mind, and effectively combines a surprisingly competitive price with performance even true enthusiasts have come to embrace. NEW! Resonance reducing frame design As an increasing number of our customers is moving over to AT fabrics these days, we have placed great emphasis on the performance of the frame in such regards. One issue has been the potential of internal resonances within the confinements of the aluminum frame in setups where powerful speakers are placed behind the frame shooting audio forward. To reduce the risk of soundwaves bouncing back and forth within the frame, thus potentialle causing audible resonances, our 6. generation UltraFrame has a significantly smaller inner compartment than before which is also filled with acoustical dampening material. The frame The elegantly rounded shape provides an exclusive impression, and the 10cm width increases the framed effect. In addition, the frame is now covered in a brand new ultrablack hand wrapped velvet that absorbs light very effectively. The frame is delivered in a "flat" package for more effecient transporting, but is still very easy to assemble. The long sides of the frame is now divided in two, reducing the size of the package significantly and thus also the transporting costs to our customers located all over the world. As such, we can now ship even the XXL frames up to 4,3m wide (185" CineScope) worldwide at competitive shipping prices. UltraWeave...
Les mer